A novel flexible and breathable stab-resistance fabric composites with ZnO nanowires growing technology
Yanyan Chu,Baokun Zhu,Shichen Li,Chao Chen,Weihan Huang,Yingying Liu,Xian Zhao,Zhiguo Zhang,Xucai Wang,Chunxiao Chen,Xiaoming Chai,Xiaogang Chen,Md. Fahaduzzaman
DOI: https://doi.org/10.1016/j.jmrt.2023.03.232
IF: 6.267
2023-05-10
Journal of Materials Research and Technology
Abstract:In this paper, a new flexible stab-resistant composite material was prepared by growing ZnO nanowires on aramid plain fabric by the hydrothermal method. Through SEM, FTIR, and XRD characterization, it is proved that ZnO nanowires have been grown on aramid fabric and the surfaces of aramid filaments become much rougher. Moreover, the inter-filament friction and breaking strength of aramid fabric with nanowires are increased significantly, especially the inter-filament friction, which has been increased by more than 4 times after ZnO nanowires growth. Stab tests were conducted on the bare aramid fabric sample and aramid fabric sample with ZnO nanowires based on the test standard of GA 68–2019. Both of the two samples are 43 layers and are subject to 5 stabs of D1 knife, 3 stabs of D2 knife and 3 stabs of D3 knife. The stab resistance of aramid fabric grown with nanowires is significantly enhanced, and the average penetration depth under the D1 knife impact is decreased by 49.7%. The reason may be that the inter-filament friction increases dramatically with the nanowires and thus the friction energy consumption increases. The flexibility test results show that the softness characteristics of the single aramid fabric and the 43-layer fabric with the nanowires are still maintained. In addition, although the growth of nanowires will lead to smaller voids and a decrease of air permeability of the fabric, the moisture permeability has been slightly improved because ZnO nanowires have the ability to bind with water.
materials science, multidisciplinary,metallurgy & metallurgical engineering