Fracture And Reliability Issues Of Materials With Magnetoelectric Coupling
Baolin Wang
2009-01-01
Abstract:Nowadays, materials with coupling magnetic, electric and mechanical effect have found increasingly applications in engineering structures, particular in the so-called smart materials/intelligent structures. Magnetoelectromechanical coupling effects have been observed in single-phase materials where simultaneous electric and magnetic ordering coexists, and in two-phase composites where the participating phases are piezoelectric and piezomagnetic. The phenomenon of magnetoelectric coupling is generally defined as the interaction between electric, magnetic and mechanical fields with in a body. Due to their high electro-magneto-mechanical coupling effect, magnetoelectric coupling materials are widely used in modem industries such as multilayer actuators, sensors, controlling devices, smart and intelligent structures, and biological devices. In order to address the issues concerning durability and reliability of these advanced devices, their fracture (failure under monotonic electric, magnetic and mechanical loads) behaviors should be investigated and understood thoroughly. A recent review paper by Fiebig reported many increasing research activities in magnetoelectric coupling [1].Most materials with magnetoelectric coupling are ceramics. Defects are often unavoidable in these materials because of their brittleness. Due to their high electromechanical coupling effect, piezoelectric materials are widely used in multilayer actuators, sensors, controlling devices, smart and intelligent structures. In order to address the issues concerning durability and reliability of these piezoelectric devices, fracture (failure under monotonic mechanical and electrical loads) behaviors of piezoelectric materials should be investigated and understood thoroughly. These multilayer structures are operated under increasing high electric and mechanical loads. Hence, studies of these advanced materials with defects are essential for reliability design. This chapter introduces the fracture and reliability of magnetoelectric coupling materials. It contains eight sections and provides solutions for a range of crack and electrode problems in magneto-electro-mechanical coupling materials. Section I briefly gives basic governing equations, boundary conditions, and energy functions for magnetoelectromechanical coupling. Section 2 focuses on the general two-dimensional anisotropic magneto-electro-mechanical coupling materials containing a straight crack. The complex variable solution based on the Stroh formalism is given. The solution is further applied to the insulted crack to obtain the crack tip field. Analytic expression for the antiplane crack tip field is also given. Detailed expressions for the stresses, electric and magnetic fields near the crack front are presented. Section 3 discusses the applicability of crack-face electromagnetic boundary conditions, which are essential for evaluate the stress, electric field and magnetic field concentrations near the crack tip (front). In section 4, effect of crack deformation under applied electric, magnetic and mechanical loads on the electric and magnetic fields inside the crack is investigated. The concept of natural electromagnetic boundary conditions on the crack-face is proposed and is verified by the finite element method. Section 5 establishes the closed-forma solutions for the internal penny-shaped cracks in magnetoelectric coupling materials. Results for normal traction, in plane shearing, electric and magnetic loads are obtained separately. In section 6, piezoelectric materials with surface and interface electrodes are mentioned. The full field solutions are expressed in terms of the intensity of the applied electric field intensity. Section 7 introduces the thermal cracking of piezoelectric materials with embedded penny-shaped cracks. Solutions for the cases of prescribed temperature and thermal flux on the crack faces are established. Finally, section 8 presents a fatigue accumulation damage model for materials with electro-mechanical coupling. The model is obtained theoretically in closed-form.