Abstract:Removing heavy metal ions from wastewater reduces health and ecological risks and allows for their reuse. Polymer inclusion membranes with integrated ion carriers offer an efficient solution for removing toxic metal ions from industrial wastewater. These membranes can be further enhanced by using biodegradables polymer blends and incorporating nanofillers to improve their selectivity, stability, extraction efficiency, and biodegradability. In this study, a novel biodegradable polymer blend consisting of 54% poly(lactic acid) (PLA) and 13% polybutylene adipate terephthalate (PBAT) was utilized as the base polymer, with 30% Aliquat 336 as an ion carrier and either 3% graphene oxide (GO) or 3% cloisite 30B (C30B) as nanofillers. The hybrid blend contained a total of 3% nanofillers, with 1.5% graphene oxide (GO) and 1.5% cloisite 30B (C30B). These components were integrated through the evaporation casting method and evaluated for their potential as polymer inclusion membranes (PIMs) for Cr(VI) extraction. Various analytical methods, including X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), were employed to explore the microstructure-property relationships of the fabricated nanocomposite PIMs. The analyses revealed the development of new semi-crystalline membrane structures, resulting in enhanced hexavalent chromium extraction. It was found that the presence of nanofillers altered the bulk structure, creating apparent microvoids in the membranes filled with 3% GO and the hybrid membrane, which were not observed in membranes filled with C30B. This resulted in higher extraction efficiency in the membranes loaded with GO, whereas membranes loaded with C30B exhibited decreased Cr(VI) extraction. An intermediate extraction percentage was found in the hybrid membrane filled with both nanofillers. Additionally, the incorporation of GO and C30B significantly improved membrane stability across various media, reducing mass loss in NaCl/NaOH to 13.36%. The TGA analyses further confirmed that membranes incorporating GO and C30B exhibited improved thermal stability.

Hybrid ionogel membrane of PVDF incorporating ionic liquid-reduced graphene oxide for the removal of heavy metal ions from synthetic water

Improvement of Heavy Metal Separation Performance by Positively Charged Small-Sized Graphene Oxide Membrane.

Enhancing the Dye-Rejection Efficiencies and Stability of Graphene Oxide-Based Nanofiltration Membranes via Divalent Cation Intercalation and Mild Reduction

Plasma-assisted in-situ preparation of graphene-Ag nanofiltration membranes for efficient removal of heavy metal ions

Sustainable Microbial and Heavy Metal Reduction in Water Purification Systems Based on PVA/IC Nanofiber Membrane Doped with PANI/GO

Advancements in Cr(VI) Removal from Aqueous Solution Using PLA/PBAT/GO/Cloisite 30b Hybrid Nanocomposite Polymer Inclusion Membranes

Azido-group Functionalized Graphene Oxide/polysulfone Mixed Matrix Ultrafiltration Membrane with Enhanced Interfacial Compatibility for Efficient Water and Wastewater Treatment

Fabrication of novel Zn (II)-imidazole based mixed matrix membranes for heavy metal removals from drinking water

Fabrication of nanofiltration membrane with enhanced water permeability and dyes removal efficiency using tetramethyl thiourea-doped reduced graphene oxide

Microscopic Techniques for Fabrication of Polyethersulfone Thin‐film Nanocomposite Membranes Intercalated with UiO‐66‐SO3H for Heavy Metal Ions Removal from Water

Combinational strategy of chemical graft and layer-by-layer assembly of novel nanocomposite membranes fabrication for heavy metal ion capture

A mild one-step method to fabricate graphene oxide cross-linked with dopamine/polyethyleneimine (GO@DA/PEI) composite membranes with an ultrahigh flux for heavy metal ion removal

Tailoring thin film composite membranes for enhanced removal of heavy metals from water

Polysulfone Membranes Based Hybrid Nanocomposites for the Adsorptive Removal of Hg(II) Ions

Ultrathin Graphene Oxide-Based Nanocomposite Membranes for Water Purification

Synergistic performance of polyethersulfone membranes embedded with graphene oxide‐zinc oxide nanocomposites for efficient heavy metal and dye removal with strong antibacterial properties

Stable Forward Osmosis Nanocomposite Membrane Doped with Sulfonated Graphene Oxide@Metal–Organic Frameworks for Heavy Metal Removal

Development of ZnO-GO-NiO membrane for removal of lead and cadmium heavy metal ions from wastewater

A High-Flux and Anti-Interference Dual-Functional Membrane for Effective Removal of Pb(II) from Natural Water.

Preparation of rGO and Iron Oxide Nanoparticles Incorporated Polyvinyl Acetate based Membrane for the removal of Pb2+ from Anticorrosive paint Industrial wastewater

A novel strategy for efficient removal of hazardous metal ions based on thermoresponsive phase separation of the PNIPAM/GO system