Abstract:There is a steep increase in demand for concrete as the need for infrastructure is increasing with a rapid increase in urbanization. Consequently, there has been a surging demand for cement across the globe. By using alkaline concrete activated with ground granulated blast furnace slag (GGBS), cement usage can be eliminated in concrete, which addresses the issue of CO 2 emissions concerned with the cement manufacturing process and promotes the use of industrial by-products as sustainable building materials. The current study focuses on proposing a methodology to design sustainable GGBS-based alkali-activated concrete incorporated with 100 % coarse recycled coarse aggregates (RCA) recovered from construction and demolition (C&D) waste, for various strengths by optimizing the mix proportions and verifying the same through experiments. From the current study, it is evident that this mix design procedure can be adopted to design alkali-activated slag recycled aggregate concrete (AASRAC) mixes for strengths ranging from 44 MPa to 85 MPa. The optimum values of alkalinity factor (λ) and NaOH concentration (M) i.e., 1.5 and 12, have a significant role in the development of high strengths which is attributed to the formation of hydrotalcite. Micrographs captured using scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) studies reveal that the alkaline binders promote the development of a denser and stronger interfacial transition zone (ITZ) that enhances the strength of lower AA/B concretes at the microstructural level as Ca/Si ratio is higher for lower AA/B concretes. Global warming potential (GWP) analysis reveals that the alkali-activated concretes have significantly lower GWP compared to conventional OPC-based concrete by approximately 2.5 times. The mix-design chart proposed in this study may pave the way to designing structural grade AASRAC with enhanced performance for the desired strength, which may find its application in fast-track construction and manufacturing of prefabricated elements.

Development of bio-based blended ash and fly ash based alkali activated concrete

Characterisation and life-cycle assessment of alkali-activated concrete using industrial wastes

Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash

Development of sustainable slag-based alkali-activated concrete incorporating fly ash at ambient curing conditions

A review on alkali-activated binders: Materials composition and fresh properties of concrete

Valorization of bottom ash in concrete: serviceability, microstructural and sustainability characterization

Mechanical Properties of High Early Strength Class C Fly Ash-Based Alkali Activated Concrete

A mix design methodology of blast furnace slag and fly ash-based alkali-activated concrete

Leaching behavior of sustainable concrete made with coal ash wastes as replacement of cement and sand

Engineering properties of waste-based alkali activated concrete brick containing low calcium fly ash and rice husk ash: A comparison with traditional Portland cement concrete brick

Approach to design sustainable alkali-activated slag recycled aggregate concrete: Mechanical and microstructural characterization

Production of cleaner binders by reusing agricultural by-products: An approach towards zero cement concrete for sustainable future infrastructure

The Impact of High-Alkali Biofuel Fly Ash on the Sustainability Parameters of Concrete

Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study

Recycling Untreated Coal Bottom Ash with Added Value for Mitigating Alkali–Silica Reaction in Concrete: A Sustainable Approach

An investigation on optimizing the carbonation resistance of coal bottom ash concrete with its carbon footprints and eco-costs

A study on the synthesis and performance evaluation of fly ash and alccofine as sustainable cementitious materials

Bio-modification and application of coal fly ash in cementitious composites

Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste

Formulation and characterization of cleaner one-part novel fly ash/lime-based alkali-activated material

Novel treatment method of coal bottom ash for strain-hardening alkali-activated composite