Abstract:Controlled release of active chlorine into the water system through membrane bound disinfectant, prevention of biofilm formation at the membrane surface and killing of antibiotic resistant bacteria were the study objectives that were accomplished in presented work. Cyclic amines/amides/imides are effective precursor of N-halogenated amines/amides/imides. Such N-halogenated compounds are found to be effective against antibiotic resistant bacteria such as, E. coli and S. aureus. Henceforth cyanuric acid and 5,5-dimethyl hydantoin were selected as representative precursor of such amide/imides that could be halogenated and provide antimicrobial performance. The polymer PES was introduced with side chain of primary amine. Further this primary amine was converted to secondary amine with novel modification containing cyanuric chloride. It was further modified to cyanuric acid as a desired precursor of N-halamide/imide. The PES-modified -cyanuric acid (PESmCA) was characterized using IR, NMR, XRD and SEM. While two novel monomers containing hydantoin as a branch extending from the ethyl group chain; belonging to norbornene dicarboximide and oxonorbornene dicarboximide, were successfully synthesize and characterized using IR, NMR and HRMS techniques. Further these monomers were polymerized via ring opening metathesis polymerization reaction into novel polymers of P(NDH) and P(ONDH). The polymer’s olefinic bonds were saturated to s-P(NDH) and s-P(ONDH). The unsaturated and saturated polymers were characterized through IR, NMR, and SLS techniques. The saturated polymers and the modified PES were fabricated into membranes and characterized via SEM and contact angle measurement. The membrane performance tests were conducted using pure water permeance and BSA protein rejection tests. The membranes were chlorinated and rinsed to remove adsorbed active chlorine. The rinsed membranes were characterized with IR providing respective N-Cl peak in range of 721-719 cm-1. The unwanted chlorine release into the water assembly was not observed provided that the respective polymers had covalently stable cyclic N-Cl moieties. Membranes were challenged against 106CFU/ml of bacteria (E.coli and S.aureus) in static agar test and dead end filtration tests. The membranes provided 100% inhibition of bacteria E. coli and S. aureus upon surface contact in agar plate test. The respective membranes were also suitable for dead end filtration pressure assisted bacterial flow test. The test provided 99-100 % kill of both bacteria. These N-halamide/imide novel polymer and modified polymer systems were efficiently chlorinated through repeated cycles. Keywords: Modified PES, norbornene polymers, oxonorbornene polymers, ROMP, controlled release of active chlorine, biofilm prevention, inhibition of antibiotic resistant bacteria, phase inversion, UF membranes.

Design and solvent free synthesis of novel phenazone based molecule for water disinfection and rapid removal of the anionic direct fast blue B2RL dye

Synthesis and fabrication of ultrafiltration membranes from homo and blend polymers of novel combination of cyclic amides/ imides to norbornene/ oxonorbornene; shift from classic oligomers to high performing polymer materials.

Synthesis, Characterization and Antibacterial Activity of Novel β-cyclodextrin Polyurethane Materials

Synthesis, molecular dynamics, antimicrobial activity and wound healing application of new methylidene dyes based on pyrrolinone esters

Novel pyridine isonicotinoyl hydrazone derivative: synthesis, complexation and investigation for decontamination of DR-81 from wastewater

Structure-dependent Antimicrobial Mechanism of Quaternary Ammonium Resins and a Novel Synthesis of Highly Efficient Antimicrobial Resin

High antimicrobial and Rhodamine B absorption properties of N-halamine modified mesoporous silica via a thiol-ene ‘click’ reaction

Synthesis of Magnetic Metal-Organic Framework for Efficient Adsorption of Disinfection By-Products in Water

Metal–Organic Frameworks (MOFs) for Sustainable Water Disinfection: Synthesis, Characterization, and Antimicrobial Properties

Fabrication and characterization of microporous soft templated photoactive 3D materials for water disinfection in batch and continuous flow

Innovative Benign-to-design Functionalized Adsorbents from Biomass for Rapid Azo-Dyes Separation

TARGETING PHARMACEUTICAL PHENOL; A THOROUGH ANALYSIS OF MANGANESE DOPED MOLYBDENUM DISULFIDE (MoS 2 ) CATALYST, AUGMENT BY MB DYE ASSESMENT

Design, Synthesis, Characterization, and Antimicrobial Properties of New Azo Disperse Dyes Incorporating Quinazolinone-Pyrazolone Moieties and Their Applications for Dyeing of Polyester Fabrics

Formation and Cytotoxicity of a New Disinfection By-Product (DBP) Phenazine by Chloramination of Water Containing Diphenylamine.

Removal of Organic Dyes from Aqueous Solution Using Novel Pyrene appended Zn(II)-based Metal-Organic Framework and its Photocatalytic Property

Synergism between Polyethyleneimine, Graphene Oxide, and MgFeAl-Layered Triple Hydroxide in Removing Acid Red 1 dye and Bisphenol A from Contaminated Water Samples

Synthesis, Characterization, Biological Potency, and Molecular Docking of Co2+, Ni2+, and Pd2+ Complexes Derived From Carbohydrazone Ligand and Its Application in Dye Removal

A Novel N -Halamine Biocidal Nanofibrous Membrane for Chlorine Rechargeable Rapid Water Disinfection Applications

Visible light assisted photooxidative facile degradation of azo dyes in water using a green method

A new biocompatible ternary Layered Double Hydroxide Adsorbent for ultrafast removal of anionic organic dyes

New natural product -an efficient antimicrobial applications of new newly synthesized pyrimidine derivatives by the electrochemical oxidation of hydroxyl phenol in the presence of 2-mercapto-6-(trifluoromethyl) pyrimidine-4-ol as nucleophile