Abstract:The graphical abstract describes the preparation steps of NiCo2O4/T nanocatalysts with subsequent examination of their electrochemical activity using suitable tools. The rational design of noble metal‐free electrocatalysts represents one of the basic stones for fuel cell development. With the exploration of eco‐friendly nanomaterials for the investigated alcohol oxidation process, nickel‐based electrodes have been recognized as the most auspicious anodes with promoted activity and stability. In this work, a series of NiCo2O4 nanoparticles were deposited onto graphite sheets (NiCo2O4/T) introducing varied proportions of cobalt oxide species. Co‐precipitation protocol of the respective metallic hydroxides onto the carbonaceous support was followed with consecutive annealing in an air atmosphere at 400°C. The fabricated mixed metallic oxide nanopowder was physically studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray analysis (EDX), X‐ray photoelectron spectroscopy (XPS), and selected area electron diffraction (SAED). Uniformly arranged nanoparticles were observed on graphite surface as evidenced by SEM and TEM. The cubic lattice structure of formed NiCo2O4 crystals was also confirmed by XRD through the defined peaks of binary metallic oxides clarifying their successful preparation scheme. The electrocatalytic properties of these NiCo2O4/T nanocatalysts were evaluated for oxidizing ethanol molecules in basic solution. Pronounced oxidation current densities were remarkably measured at NiCo2O4/T electrodes in relation to that at NiO/T. Differing the introduced cobalt oxide content into the synthesized nanocatalyst significantly controlled its catalytic performance. NiCo2O4/T‐20 exhibited the highest activity and stability among the prepared nanomaterials. Much decreased charge transfer resistances were also recorded at this electrode demonstrating its promoted electron transfer characteristics. This work could provide a reasonable route for the simple synthesis of comparable transition metallic oxides with promising attitudes for energy generation purposes.

Improved electrocatalytic performance of Ni nano pebbles decorated 2D Fe based MXene nanosheets for direct alcohol (methanol, ethanol and ethylene glycol) fuel cell application

MXene Introduced Between CoNi LDH and NiMoO4 Nanorods Arrays: A Bifunctional Multistage Composite for OER Catalyst and Supercapacitors

Layered double hydroxides-derived CoNi alloy nanoparticles encapsulated by porous N-doped carbon nanofibers as efficient methanol electrocatalysts for alkaline direct methanol fuel cells

A novel electrocatalyst based on Fe-ZIF-PPY nanocomposite for oxygen reduction reaction in air-breathing direct-ethanol fuel cell

Facile electrochemical fabrication of Nickel-Coated Polydiphenylamine (Ni/PDPA) nanocomposite material as efficient anode catalyst for direct alcohol fuel cell application

Hierarchical AgNi Alloy@NiO/Ni(OH)2 Nanosheets on Ni Foam as 3D Electrode towards Methanol and Formate Oxidation

Hierarchical N-doped carbon nanofiber-loaded NiCo alloy nanocrystals with enhanced methanol electrooxidation for alkaline direct methanol fuel cells

Multicomponent nanoporous Al–Ni–Cu–Pt–Pd–Co as highly stable anode catalysts in a flexible room-temperature pure ethanol–powered solid-state fuel cell

Spinel Nickel–Cobalt Oxide Nanorods Supported on Ti3C2Tx-MXene Nanosheets As Electrocatalysts for the Methanol Oxidation Reaction Via a CO-Free Pathway

Durable Ni3N porous nanosheets array for non-noble metal methanol oxidation reaction

Standalone nickel layered double hydroxide and nickel oxide electrodes as effective anodes in alkaline direct methanol fuel cell

Outstanding Activity and Durability of Supported NiCo2O4 Nanoparticles for Direct Ethanol Fuel Cells

New type nanocomposite based on metal-organic frameworks decorated with nickel nanoparticles as a potent electrocatalyst for methanol oxidation in alkaline media

Flexible Solid‐State Direct Ethanol Fuel Cell Catalyzed by Nanoporous High‐Entropy Al‐Pd‐Ni‐Cu‐Mo Anode and Spinel (AlMnCo) 3 O 4 Cathode

Novel palladium-decorated molybdenum carbide/polyaniline nanohybrid material as superior electrocatalyst for fuel cell application

Palladium nanoparticles anchored on MXene-based N-doped porous carbon nanosheets as an advanced electrocatalyst for ethanol oxidation

Highly Stable NiCoZn Ternary Mixed-Metal-Oxide Nanorods as a Low-Cost, Non-Noble Electrocatalyst for Methanol Electro-Oxidation in Alkaline Medium

Facile Synthesis of Highly Active Three-Dimensional Urchin -Like Pd@PtNi Nanostructures for Improved Methanol and Ethanol Electrochemical Oxidation

Nickel 2‐Methylimidazole Metal–Organic Framework Ultrathin Nanosheets/Titanium Carbide MXene Hybrid Nanostructure as a Bifunctional Electrocatalyst for Methanol and Urea Oxidation Reactions

Highly active methanol oxidation electrocatalyst based on 2D NiO porous nanosheets:a combined computational and experimental study

Synergistic catalytic enhancement of metal-organic framework derived nanoarchitectures decorated on graphene as a high-efficiency bifunctional electrocatalyst for methanol oxidation and oxygen reduction