Abstract:Microstructures play a dominant role in flexible electronics to improve the performance of the devices, including sensitivity, durability, stretchability, and so on. However, the complicated and expensive fabrication process of these microstructures extremely hampers the large-scale application of high-performance devices. Herein, we propose a novel method to fabricate flexible graphene-based sensors with a 3D microstructure by generating laser-induced graphene (LIG) on the 3D printed polyether ether ketone corrugated substrate, which is referred to as CLIG. Based on that, two integrated piezoresistive sensors are developed to monitor the precise strain and pressure signals. Contributed to the 3D corrugated graphene structure, the sensitivities of strain and pressure sensors can be up to 2203.5 and 678.2 kPa–1, respectively. In particular, the CLIG-based strain sensor exhibits a high resolution to the microdeformation (small as 1 μm or 0.01% strain) and remarkable durability (15,000 cycles); meanwhile, the pressure sensor presents a remarkable working range (1–500 kPa) and fast response time (24 ms). Furthermore, the CLIG-based sensors provide a stable data source in the applications of human-motion monitoring, pressure array, and self-sensing soft robotic systems. High accuracy allows CLIG sensors to recognize more subtle signals, such as pulse, swallowing, gesture distinction of human, and movement status of soft robotics. Overall, this technology shows a promising strategy to fabricate high-performance sensors with high efficiency and low cost.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12686.Schematic of the fabricating process of the CLIG film, surface morphology of the 3D printed waved PEEK substrate with different speeds, Raman spectrum of LIG under different scanning times on the waved PEEK substrate, material curve of PDMS, finite element simulation, simulated physical models of CLIG and LIG sensors, enlarged cracks shown in Figure 3c, growth of cracks on CLIG and LIG, comparison between CLIG and LIG strain sensors, contact resistance calculation of the CLIG pressure sensor, calculation of resistance of the representative unit of the pressure sensor, combination of strain and pressure sensors in a single mechanical finger, and details of 3D printing parameters of the PEEK substrate (PDF)Video of the flexibility and robustness of the CLIG film (MP4)Video of the conformal pressure array (MP4)Video of the self-sensing robotic system (MP4)This article has not yet been cited by other publications.

Highly conductive laser-induced graphene through the deposition of liquid metal particles for flexible electronics

High-Resolution Rapid Prototyping of Liquid Metal Electronics by Direct Writing on Highly Prestretched Substrates

Laser-Induced Graphene Based Flexible Electronic Devices

Laser Writing of Eutectic Gallium–Indium Alloy Graphene‐Oxide Electrodes and Semitransparent Conductors

Self-sintering liquid metal ink with LAPONITE? for flexible electronics

Parametric study of laser‐induced graphene conductive traces and their application as flexible heaters

One‐Step Liquid Metal Transfer Printing: Toward Fabrication of Flexible Electronics on Wide Range of Substrates

Laser‐Induced Graphene Toward Flexible Energy Harvesting and Storage Electronics

Green, Biodegradable, and Flexible Resistive Heaters‐Based Upon a Novel Laser‐Induced Graphene Manufacturing Process

Printed and Laser-Activated Liquid Metal-Elastomer Conductors Enabled by Ethanol/PDMS/Liquid Metal Double Emulsions

Preparation of Laser‐Induced Graphene Fabric from Silk and Its Application Examples for Flexible Sensor

Highly flexible liquid metal/photocurable polymer electrodes via direct laser patterning

Direct Writing of Flexible Electronics Through Room Temperature Liquid Metal Ink.

Laser-induced graphene for bioelectronics and soft actuators

Intrinsically stretchable porous liquid-metal conductor for multifunctional electronics application

Wiring up Liquid Metal: Stable and Robust Electrical Contacts Enabled by Printable Graphene Inks

The fabrication of wearable sensors based on laser-induced graphene

Laser-Guided, Self-Confined Graphitization for High-Conductivity Embedded Electronics

Laser-Induced Corrugated Graphene Films for Integrated Multimodal Sensors

Versatile fabrication of liquid metal nano-ink based flexible electronic devices

Fabrication of Laser-Induced Graphene Based Flexible Sensors Using 355 nm Ultraviolet Laser and Their Application in Human–Computer Interaction System