Abstract:PURPOSE:Diagnostic imaging procedures require optimization depending on the medical task at hand, the apparatus being used, and patient physical and anatomical characteristics. The assessment of the radiation dose and associated risks plays a key role in safety and quality management for radiation protection purposes. In this work, we aim at developing a methodology for personalized organ-level dose assessment in x-ray computed tomography (CT) imaging.METHODS:Regional voxel models representing reference patient-specific computational phantoms were generated through image segmentation of CT images for four patients. The best-fitting anthropomorphic phantoms were selected from a previously developed comprehensive phantom library according to patient's anthropometric parameters, then registered to the anatomical masks (skeleton, lung, and body contour) of patients to produce a patient-specific whole-body phantom. Well-established image registration metrics including Jaccard's coefficients for each organ, organ mass, body perimeter, organ-surface distance, and effective diameter are compared between the reference patient model, registered model, and anchor phantoms. A previously validated Monte Carlo code is utilized to calculate the absorbed dose in target organs along with the effective dose delivered to patients. The calculated absorbed doses from the reference patient models are then compared with the produced personalized model, anchor phantom, and those reported by commercial dose monitoring systems.RESULTS:The evaluated organ-surface distance and body effective diameter metrics show a mean absolute difference between patient regional voxel models, serving as reference, and patient-specific models around 4.4% and 4.5%, respectively. Organ-level radiation doses of patient-specific models are in good agreement with those of the corresponding patient regional voxel models with a mean absolute difference of 9.1%. The mean absolute difference of organ doses for the best-fitting model extracted from the phantom library and Radimetrics™ commercial dose tracking software are 15.5% and 41.1%, respectively.CONCLUSION:The results suggest that the proposed methodology improves the accuracy of organ-level dose estimation in CT, especially for extreme cases [high body mass index (BMI) and large skeleton]. Patient-specific radiation dose calculation and risk assessment can be performed using the proposed methodology for both monitoring of cumulative radiation exposure of patients and epidemiological studies. Further validation using a larger database is warranted.

Development of 3D printed patient-specific compensator for total body irradiation based on CT images

Application of new three-dimensional printed tissue compensators in radiotherapy

Assessment of 3D-printed tissue compensators for superficial tumor X-ray radiation compensation

Preliminary Study for Dosimetric Characteristics of 3D-printed Materials with Megavoltage Photons

Potential of 3d Printing Technologies for Fabrication of Electron Bolus and Proton Compensators

Intensity Modulated High Dose Rate (HDR) Brachytherapy Using Patient Specific 3D Metal Printed Applicators: Proof of Concept

Patient-Specific Quality Assurance Using a 3D-Printed Chest Phantom for Intraoperative Radiotherapy in Breast Cancer

Development of Patient Specific Conformal 3D-Printed Devices for Dose Verification in Radiotherapy

Development of a 3D-printed phantom for total skin electron therapy dose assessment

Shaping success: clinical implementation of a 3D-printed electron cutout program in external beam radiation therapy

Development of 3D Dosimetry System Using Polymer Gel (TENOMAG) and Optical-CT Scanner in Prostate IMRT

Artifact-free CT images for electron beam therapy using a patient-specific non metallic shield

3D printed heterogeneous paediatric head and adult thorax phantoms for linear accelerator radiotherapy quality assurance: from fabrication to treatment delivery

Validation of Monte Carlo Iodine-131 radiopharmaceutical dosimetry workflow using a 3D printed anthropomorphic head and neck phantom

Innovative 3D printing and molding process for secondary-skin-collimator fabrication

On the gamma radiation response of commercially available 3D printing materials for medical dosimetry

Dosimetry Evaluation of Treatment Planning Systems in Patient-Specific 3D Printed Anthropomorphic Phantom for Breast Cancer after Mastectomy using a Single-Beam 3D-CRT Technique for Megavoltage Electron Radiation Therapy

A dosimetric comparison of CT- and photogrammetry- generated 3D printed HDR brachytherapy surface applicators

Dosimetry assessment of patient-specific 3D printable materials for HDR surface brachytherapy

Construction of Patient-Specific Computational Models for Organ Dose Estimation in Radiological Imaging.

A clinical solution for non‐toxic 3D‐printed photon blocks in external beam radiation therapy