Abstract:Additive manufacturing (AM) is recognized as a core technology for producing high-value components. The production of complex and individually modified components, as well as prototypes, gives additive manufacturing a substantial advantage over conventional subtractive machining. For most industries, some of the current barriers to implementing AM include the lack of build repeatability and a deficit of quality assurance standards. The mechanical properties of the components depend critically on the density achieved. Therefore, defect/porosity analysis must be carried out to verify the components’ integrity and viability. In parts produced using AM, the detection of unfused powder using computed tomography is challenging because the detection relies on differences in density. This study presents an optimized methodology for differentiating between unfused powder and voids in additive manufactured components, using computed tomography. Detecting the unfused powder requires detecting the cavities between particles. Previous studies have found that the detection of unfused powder requires a voxel size that is as small as 4 μm 3 . For most applications, scanning using a small voxel size is not reasonable because of the part size, long scan time, and data analysis. In this study, different voxel sizes are used to compare the time required for scanning, and the data analysis showing the impact of voxel size on the detection of micro defects. The powder used was Ti6Al4V, which has a grain size of 45–100 μm, and is typically employed by Arcam electron beam melting (EBM) machines. The artifact consisted of a 6 mm round bar with designed internal features ranging from 50 μm to 1400 μm and containing a mixture of voids and unfused powder. The diameter and depth of the defects were characterized using a focus variation microscope, after which they were scanned using a Nikon XTH225 industrial CT to measure the artifacts and characterize the internal features for defects/pores. To reduce the number of the process variables, the measurement parameters, such as filament current, acceleration voltage, and X-ray filtering material and thickness were kept constant. The VGStudio MAX 3.0 (Volume Graphics, Germany) software package was used for data processing, surface determination, and defects/porosity analysis. The main focus of this study is to explore the optimal methods for enhancing the detection of pores/defects while minimizing the time taken for scanning, data analysis, and determining the effects of noise on the analysis.

Detection of Porosity in Impregnated Die-Cast Aluminum Alloy Piece by Metallography and Computer Tomography

Using Micro-CT Scanning to Quantitative Characterize Porosity in High Pressure Die Castings and Semi-Solid Castings

Investigation of industrial die-cast Al-alloys using X-ray micro-computed tomography and machine learning approach for CT segmentation

Modelling the Impregnation of a Pressure-Tight Casting

Relationship Between Porosity Distribution and Mechanical Properties of Vacuum Die Casting AM50 Magnesium Alloy

Assessing efficacy of standard impregnation techniques on die-cast aluminum alloys using X-ray micro-CT

Three-dimensional visualization and quantification of microporosity in aluminum castings by X-ray micro-computed tomography

Automated Porosity Characterization for Aluminum Die Casting Materials Using X-ray Radiography, Synthetic X-ray Data Augmentation by Simulation, and Machine Learning

Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography

Problem of Acceptability of Internal Porosity in Semi-Finished Cast Product as New Trend "Tolerance of Damage" Present in Modern Design Office

Characterization on the formation of porosity and tensile properties prediction in die casting Mg alloys

On the Competition between Pores and Hidden Entrainment Damage during In Situ Tensile Testing of Cast Aluminum Alloy Components

Macro Porosity Formation: A Study in High Pressure Die Casting

Quantitative Analysis of 3D Pore Characteristics Effect on the Ductility of HPDC Al-10Si-0.3Mg Alloy through X-Ray Tomography

Identifying Critical Defect Sizes From Pore Clusters in Nickel-based Superalloys Using Automated Analysis and Casting Simulation

Analysis of the Quality of Incoming AlSi9Mn Alloy Ingots

Ultrasonic Phased Array Technique for Defect Detection and Sizing in Heavy-Walled Cast Components

Procedure of Eliminating Porosity in Grey Cast Iron with Low Sulphur Content

Evaluation of the Internal Structure of the Multilayer Ceramic Mould for Precision Casting Critical Parts of Aircraft Engines by X-ray Computed Tomography

Measurement and characterization of porosity in aluminium selective laser melting parts using X-ray CT

Evaluation of Porosity of Precision Castings Made of High-Temperature Creep Resisting Nickel Superalloys