Abstract:The plasmonic phase‐change material In3SbTe2 can be reversibly switched from an amorphous dielectric to a crystalline metallic state. Infrared emissivity control by patterning a grating absorber metasurface for different polarizations, which can be only seen in the long‐wave infrared (LWIR) regime, is demonstrated. Additionally, a 1 × 1 cm2 metasurface is fabricated with enhanced emissivity to display an apparent local temperature pattern. Metasurfaces with perfect infrared absorption promise integrated filters and compact detector elements with narrowband thermal emission. Phase‐change materials (PCMs) are prime candidates for active, non‐volatile absorption tuning. Commonly, the response of the entire metasurface is tuned, while local adaptions remain elusive. In this work, flexible encoding of different absorption/emission properties within a metasurface is shown. The plasmonic PCM In3SbTe2 (IST) is employed to obtain control over the emissivity by patterning an adaptable grating absorber metasurface. Using a commercial direct laser writing setup, the IST is locally switched from an amorphous dielectric into a crystalline metallic state, and cm‐sized stripe gratings are written above a reflecting mirror. Modification of already written patterns is demonstrated by changing the laser power and thus the IST stripe width to encode different polarization‐sensitive patterns with nearly perfect absorption into the same metasurface. Finally, an apparent local temperature pattern due to the large‐area emissivity shaping metasurface is measured with a conventional thermal camera. The results pave the way towards low‐cost, large‐area, and adaptable patterning of metasurfaces with wavelength and polarization‐selective perfect absorption, enabling applications like enhanced thermal detection, infrared camouflage, or encoding anti‐counterfeiting symbols.

Broadband hyperbolic thermal metasurfaces based on the plasmonic phase-change material In 3 SbTe 2

Laser‐Printed Terahertz Plasmonic Phase‐Change Metasurfaces

Thermal Hyperbolic Metamaterials

Polarization Switching of Thermal Emissions Based on Plasmonic Structures Incorporating Phase-Changing Material Ge2Sb2Te5

Tunable Metasurfaces Based on Phase-Change Materials

Applications of Hyperbolic Metamaterial Substrates

Broadband Binary-Reflection-phase Metasurfaces with Undistorted Transmission Wavefront Via Mirror Symmetry

Broadband and high-efficiency thermal switchable InSb metasurface for terahertz wave anomalous reflection and focusing effect

Tunable hyperbolic polaritons with plasmonic phase-change material In 3 SbTe 2

Plasmonic Enhanced Photothermal Effects and Its Applications.

Dynamic Thermal Emission Control Based on Ultrathin Plasmonic Metamaterials Including Phase‐Changing Material GST

Active Spatial Control of Photothermal Heating and Thermo-Actuated Convective Flow by Engineering a Plasmonic Metasurface with Heterodimer Lattices

Full-space Terahertz Metasurface Based on Thermally Tunable InSb

Tunable Terahertz Wavefront Modulation Based on Phase Change Materials Embedded in Metasurface

A Broadband Double-Lined Metasurface for Simultaneous Generation of Inverse Functions

Infrared Beam-shaping on Demand via Tailored Geometric Phase Metasurfaces employing the Plasmonic Phase-Change Material In3SbTe2

Hyperbolic Metasurfaces: Hyperbolic Metamaterial Devices for Wavefront Manipulation (laser Photonics Rev. 13(1)/2019)

Broadband metasurface based on metallic stereo split-ring structure for full-space terahertz beam deflection and focusing effect

Controlling thermal emission with metasurfaces and its applications

Reconfigurable and Polarization‐Dependent Grating Absorber for Large‐Area Emissivity Control Based on the Plasmonic Phase‐Change Material In3SbTe2