Abstract:Flight control law parameters should be designed to provide a sufficient stability margin for closed-loop aircraft while ensuring command tracking accuracy. The singular perturbation margin (SPM) and generalized gain margin (GGM), which are generalizations of the classical phase margin (PM) and gain margin (GM), respectively, from a linear time-invariant system to a nonlinear time-varying system, can be used to quantitatively characterize the maximum singular perturbation and regular perturbation allowed to maintain system stability. In this paper, the sliding mode flight control structure and the design parameters of the sliding mode control law are first introduced for an oblique wing aircraft (OWA), the SPM-gauge and GGM-gauge are added to this closed-loop aircraft model, and the analytical expressions of the SPM and GGM are derived with respect to the control law parameters. Second, the stability margin design requirements of closed-loop aircraft in flight control system design specifications are converted into limitations on the SPM and GGM to determine the value range of the flight control law parameters. Then, with the goal of reducing the sum of the approaching time and sliding time, the parameter value combination is selected within the control law parameter range that meets the stability margin requirements, thus forming a flight control law design method for OWA during the wing skewing process. Finally, the designed control law parameters are applied to a sample OWA, and the stability margin of closed-loop aircraft during the wing skewing process is verified.

What problem does this paper attempt to address?

The problem this paper attempts to address is: During the wing surface tilt process of Oblique Wing Aircraft (OWA), how to design the parameters of the sliding mode flight control law to ensure that the closed-loop aircraft has sufficient stability margins and guarantees command tracking accuracy. Specifically, the paper focuses on how to quantify the impact of control law parameters on the stability of the closed-loop aircraft by introducing Singular Perturbation Margin (SPM) and Generalized Gain Margin (GGM), thereby achieving fast response and error convergence while meeting stability requirements. ### Main Issues 1. **Design of Stability Margins**: Traditional Phase Margin (PM) and Gain Margin (GM) are difficult to apply to the wing surface tilt process of OWA because the linear model in this process is not unique and is complex. Therefore, new stability margin indicators are needed to quantify the impact of control law parameters on system stability. 2. **Selection of Control Law Parameters**: How to select the appropriate combination of control law parameters to achieve fast command tracking and error convergence while meeting the stability margin requirements. ### Solutions 1. **Introduction of SPM and GGM**: The paper introduces Singular Perturbation Margin (SPM) and Generalized Gain Margin (GGM) based on perturbation theory and derives the relationship between these indicators and the sliding mode control law parameters through Lyapunov stability analysis methods. 2. **Design of Control Law Parameters**: By converting the stability margin design requirements of the closed-loop aircraft into the constraint conditions of SPM and GGM, the range of control law parameters is determined. Then, within the parameter range that meets the stability margin requirements, parameter combinations that can reduce the reaching time and sliding time are selected to achieve fast command tracking. 3. **Verification Method**: The designed control law parameters are applied to a specific OWA model to verify the stability margin of the closed-loop aircraft during the wing surface tilt process. ### Innovations - **Introduction of Stability Margin Requirements**: Introducing stability margin requirements into the design process of sliding mode flight control law parameters helps designers select parameter combinations from numerous control law parameters that can provide appropriate stability margins, fast response speed, and fast error convergence speed. - **Stability Indicators Based on Perturbation Theory**: Using SPM and GGM as stability indicators solves the application difficulties of traditional PM and GM in non-fixed configuration aircraft. ### Application Background During the wing surface tilt process of OWA, complex aerodynamic changes occur, leading to coupled and nonlinear characteristics of the system. The sliding mode control method, due to its adaptability and strong robustness to configuration and aerodynamic parameter changes, becomes an effective means to solve this problem. However, how to achieve fast command tracking while ensuring stability is a key issue that needs to be addressed in the design process.

Sliding Mode Flight Control Law Design Requirements for Oblique Wing Aircraft Based on Perturbation Theory

Adaptive Sliding Mode Control with Transition Process for Flapping Wing Aerial Vehicle

Stability of the Flapping-Wing Vehicle Near Hovering under Active Control by Varying Flapping Frequency

Sliding mode control of trajectory tracking for underactuated aerostat

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

Adaptive PI Control Based Stability Margin Configuration of Aircraft Control Systems with Unknown System Parameters and Time Delay

Design of Flight Control Law of Gust Alleviation for Flexible Aircraft

Tracking Controller Design for Aero-Engine Based on Improved Multi-Power Reaching Law of Sliding Mode Control

Robust flight control law design using QFT

Disturbance Observer-Based Backstepping Terminal Sliding Mode Aeroelastic Control of Airfoils

Adaptive Control of Novel Configuration with Moving Mass

Non-overshooting sliding mode for UAV control

Longitudinal Attitude Control and Stability Analysis for a Low Aspect Ratio Flying Wing UAV at High Angle of Attack

Adaptive fractional order non-singular terminal sliding mode anti-disturbance control for advanced layout carrier-based UAV

Barrier Lyapunov Function-Based Sliding Mode Control for BWB Aircraft with Mismatched Disturbances and Output Constraints

Adaptive Dynamic Sliding Mode Control Laws for Attitude Stabilization of Flexible Spacecraft

Adaptive Super Twisting Sliding Mode Control for Flying-Wing UAV

Aeroservoelastic model based active control for large civil aircraft

Finite-time terminal sliding mode attitude control for tailless full-wing configuration UAVs based on extended state observers and auxiliary compensators

Disturbance Compensation Based Piecewise Linear Control Design for Perching Maneuvers