Abstract:In the vast inland areas of China, more than 3 million bridges have been built to connect the remote mountainous areas and also to make up the urban transportation networks. For these bridges, reinforced concrete is the most widely adopted material in construction. Unlike the offshore bridges subjected to chloride-induced corrosion, the inland bridges have been constantly threatened by atmospheric carbonation-induced corrosion. The inland areas of China are earthquake-prone regions where several major seismic events occurred in recent years. To investigate the seismic vulnerability of inland bridges subjected to atmospheric carbonation-induced corrosion, the time-dependent characteristics of carbonation were analyzed based on an illustrative cable-stayed bridge, and the time-dependent damage states of bridge components during earthquakes were identified through the material strains of reinforcing steel and concrete. A life-cycle fragility assessment method was proposed and was used to establish the time-dependent seismic fragility curves of the illustrative cable-stayed bridge at the component and system levels. Based on the time-dependent fragility analysis, the macro identification for the seismic damage to bridge system under each damage state and its influence on traffic and repair levels were discussed, the damage sequences of bridge components for different damage states were predicted, and the application strategies of the prediction for components' damage sequences at various service periods were introduced. The research shows that the stirrups tend to be corroded first, leading to rapid decreases of the characteristic strain values of the confined core concrete; and the longitudinal reinforcement experiences very slight corrosion during the bridge's service life. The atmospheric carbonation-induced corrosion increases significantly the damage probabilities of the various bridge components, and consequently change their damage sequences at different damage states. However, the carbonation-induced corrosion does not change the CDPs (complete damage points) and MDPs (maximum damage points) of various bridge components. The bridge system is vulnerable during earthquakes and significantly affected by material degradation. Within the design service life, the damage probabilities of the bridge system can be increased by 0.5620 by the carbonation-induced corrosion, the PGAs (peak ground accelerations) corresponding to CDPs can be decreased by 0.1 g, and the MDPs of the failure state can gradually convert to the CDPs. It is possible to predict the damage sequences of the bridge components during earthquakes on the basis of seismic fragility analysis for different service periods of the bridge, based on which the corresponding maintenance and retrofit strategies can then be determined to protect the bridge against possible earthquakes, and the costs can be reduced.

Longitudinal seismic fragility assessment of an integral bridge-ground system in liquefaction-induced lateral spreads

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Three-dimensional finite element modelling for seismic response analysis of pile-supported bridges

A holistic framework for seismic analysis of extended pile-shaft-supported bridges against different extents of liquefaction and lateral spreading

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Seismic fragility assessment of long-span cable-stayed bridges in China

Inertial and kinematic interactions of bridge‐pile group subjected to liquefaction induced lateral spreading: Large‐scale shaking table experiments

System-based probabilistic evaluation of longitudinal seismic control for a cable-stayed bridge with three super-tall towers

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Performance Assessment of Reinforced Concrete Bridges Under Coupled Horizontal and Vertical Ground Motions Using Fragility Surfaces

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Seismic Response of A Multi-Span Bridge Based on Remote Testing Platform Netslab

Seismic vulnerability analysis of continuous beam bridge based on finite element Method

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

Seismic fragility assessment of a multi-span cable-stayed bridge with tall piers

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models

Transverse seismic damage mode identification of deteriorating simply-supported highway bridges

A shake table investigation of dynamic behavior of pile supported bridges in liquefiable soil deposits

Life-cycle seismic damage identification and components damage sequences prediction for cable-stayed bridge based on fragility analyses

Effect of Soil–Bridge Interactions on Seismic Response of a Cross-Fault Bridge: A Shaking Table Test Study