Abstract:Electronic waste, or e-waste, represents one of the rapidly expanding categories of waste worldwide. By 2019, the global production of e-waste had surged to 53.6 million tons. Due to its substantial metal content, e-waste holds significant financial value, estimated at US$57 billion globally in 2019, predominantly concentrated in printed circuit boards (PCBs). Previous studies have explored hydrometallurgy techniques to extract base metals from PCBs, but effectively recovering these solubilized metals remained a challenge. This research sought to assess metal recovery from PCB waste leachate by utilizing hydrogen sulfide generated through a consortium of sulfate-reducing bacteria (SRB) in a fluidized bed reactor (FBR). Both lactate and glycerol were examined as potential organic electron donors for the sulfate reduction. With lactate (1 g L −1 ) as the electron donor, the FBR achieved an average sulfate reduction efficiency of 62%, with a hydrogen sulfide (H 2 S) production rate of 250 mg H 2 S-S L −1 d −1 and H 2 S-S concentration of 300 mg L −1 in the effluent. When glycerol was the organic electron donor, the average sulfate reduction efficiency was 49%, H 2 S production rate was 210 mg H 2 S-S L −1 d −1 and H 2 S-S concentration was 260 mg L −1 . Desulfovibrio , Desulfococcus and Desulfomicrobium were the dominant sulfate reducers in the FBR. The resulting dissolved hydrogen sulfide was employed to recover metals from e-waste leach liquor. Utilizing biogenic sulfide and NaOH, a notably high precipitation efficiency (>99%) was attained for aluminum, nickel, copper, and zinc. Additionally, iron, utilized in the e-waste leaching process, was also recovered with an efficiency exceeding 99%. The precipitation of metals occurred within a pH range from 1.5 to 8.5. Overall, this process facilitated the formation of valuable mixed-metal precipitates from waste PCB-derived leachate. These precipitates could undergo further purification or serve as raw material for subsequent processes.

Base metals recovery from waste printed circuit board leachate using biogenic hydrogen sulfide gas