Abstract:Red mud represents an environmental and economic liability for the alumina industry in the form of wasted raw material. Although some leaching studies have been performed, there are deficiencies in the current literature regarding the amounts of metals extracted relative to each other, and minimal information regarding silicon contamination of extracts. There is also limited knowledge of extraction efficiencies of different acids (particularly in the case of phosphoric acid) under the same experimental conditions. This study focused on the leaching behaviour of the four most extractable elements present within red mud (iron, titanium, aluminium and silicon). By varying the experimental conditions, acid concentration, and type of acid, a comprehensive dataset of leaching trends was obtained. This allowed for direct comparison of leaching efficiency for the four elements under the same conditions, which was difficult previously due to the variation of experimental conditions and red mud composition between studies. The patterns in recoveries were explained in terms of the reactivities of the mineral phases within red mud and the interaction between the different acids and the reaction surfaces. Out of the four acids studied (nitric, hydrochloric, sulfuric, and phosphoric) phosphoric and hydrochloric acids produced some of the best recoveries for iron (76–78%) and titanium (23–24%), and phosphoric acid also produced the highest recoveries for silicon (49%) and aluminium (50%). The differences observed between the acid types and reaction conditions revealed potential for development of element selective extraction methods. Additionally, explaining leaching behaviour in terms of the mineral phases present allowed easier prediction of expected leaching trends for these four elements, which made this study applicable to red muds with a wide variety of compositions.

Bioleaching of Valuable Elements from Red Mud: A Study on the Potential of Non-Enriched Biomass

Bioleaching of secondary and critical raw materials from Red Mud by a mixed culture in a semi-continuous reactor

Extraction of Al and rare earths (Ce, Gd, Sc, Y) from red mud by aerobic and anaerobic bi-stage bioleaching

Efficient dealkalization of red mud and recovery of valuable metals by a sulfur-oxidizing bacterium

Comprehensive examination of acid leaching behaviour of mineral phases from red mud: Recovery of Fe, Al, Ti, and Si

Staged leaching behavior of red mud during dealkalization with mild acid

Extraction of Fe and Al from red mud using carbothermic reduction followed by water leaching

Hydrometallurgical Recycling of Red Mud to Produce Materials for Industrial Applications: Alkali Separation, Iron Leaching and Extraction

Hidden values in bauxite residue (red mud): recovery of metals

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Recovery of valuable metals from red mud: A comprehensive review

Recovery of Fe and Al from red mud by a novel fractional precipitation process

Simulation and Experimental Investigation on One-Step Process for Recovery of Valuable Metals and Preparation of Clean Mineral Wool from Red Mud

Bio-mining of Lanthanides from Red Mud by Green Microalgae

Hydrothermal Resource-saving Processes in Complex Processing of Bauxite and Red Mud

Summary of research progress on separation and extraction of valuable metals from Bayer red mud

Efficient utilization of red mud waste via stepwise leaching to obtain α-hematite and mesoporous γ-alumina

Aluminium leaching from red muds for their complexing reprocessing

The Study of Acid Leaching on the Mineralogical and Microscopic Changes of Red Mud

Iron Recovery from Red Mud Using Carbothermic Roasting with Addition of Alkaline Salts

Research on High-Pressure Hydrochloric Acid Leaching of Scandium, Aluminum and Other Valuable Components from the Non-Magnetic Tailings Obtained from Red Mud after Iron Removal