Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Fused Deposition Modeling (FDM) has emerged as a cost-effective and user-friendly technique that has garnered significant attention in recent years. However, challenges persist when printing soft materials using FDM technology. This study proposes a solution by blending a soft polyolefin elastomer (POE) with a stiffer material, acrylonitrile butadiene styrene (ABS). A comprehensive experimental investigation utilizing a direct pellet printing method was conducted to 3D print POE-ABS blends in various ratios (10%, 30%, and 50% ABS content). The study encompassed material preparation, 3D printing, SEM (Scanning Electron Microscopy) analysis, Dynamic Mechanical Thermal Analysis (DMTA), uniaxial tensile testing, and compression testing to assess the mechanical properties and energy absorption capabilities of the 3D printed blends. The results of the DMTA showed that the blends with a higher amount of ABS have a larger area under the Tan δ curve, indicating their ability to absorb more energy. The SEM images revealed that as the proportion of ABS increases, the gaps between layers and beads become smaller. The mechanical properties of the pure printed POE, such as its elongation at break and tensile strength, were 2138% and 2.83 MPa, respectively. However, as the ABS content increased, the samples exhibited more rigid behavior, with a final transition to 50/50 ratio resulting in 9.4 MPa tensile strength and 160% elongation at break. The energy absorption test demonstrated that the sample with 30% ABS content has the highest energy absorption capability among all the tested samples. This research underscores the potential of blending soft and stiff materials to tailor properties for additive manufacturing applications, emphasizing the significance of material composition in achieving desired mechanical performance, printability, and functionality in printed objects.

On fabrication of acrylonitrile butadiene styrene-zirconium oxide composite feedstock for 3D printing-based rapid tooling applications

On FFF-based 3D printing of wear resistive ABS-Graphene nanocomposites for rapid tooling in wet condition

Acrylonitrile Butadiene Styrene-ZrO2 Composites for Roller Burnishing as Post-processing of 3D Printed Parts: Machine Learning Modeling Using Classification and Regression Trees

Three-dimensional printing with waste acrylonitrile butadiene styrene: Processing and characterization

The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites

Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers

Enhancing Tribological Performance of Self-Lubricating Composite via Hybrid 3D Printing and In Situ Spraying

The Effect of Nano Zirconium Dioxide (ZrO2)-Optimized Content in Polyamide 12 (PA12) and Polylactic Acid (PLA) Matrices on Their Thermomechanical Response in 3D Printing

3D printing of continuous metal fiber-reinforced recycled ABS with varying fiber loading

A study of tensile and thermal properties of 3D printed conductive ABS – ZnO composite

Investigating physical and mechanical properties of alumina/acrylonitrile butadiene styrene composites manufactured by fused deposition modeling

Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing

Optimizing the Rheological and Thermomechanical Response of Acrylonitrile Butadiene Styrene/Silicon Nitride Nanocomposites in Material Extrusion Additive Manufacturing

Mechanical investigations on secondary recycled ABS-based composite multi-layered tensile and flexural specimens prepared by fused filament fabrication

Enhanced fracture toughness and tensile strength of 3D printed recycled ABS composites reinforced with continuous metallic fiber for load-bearing application

3D printed polylactide based zirconia toughened alumina composites: fabrication, mechanical and in vitro evaluation

Fabrication of High-Performance Al2O3-ZrO2 Composite by a Novel Approach That Integrates Stereolithography-Based 3D Printing and Liquid Precursor Infiltration

Production of Composite Zinc Oxide–Polylactic Acid Radiopaque Filaments for Fused Deposition Modeling: First Stage of a Feasibility Study

Mechanical, thermal, and microstructure analysis of 3D printed polyolefin elastomer-acrylonitrile butadiene styrene blends for tunable mechanical properties

ZnO nanoparticle-grafted PLA thermoplastic composites for 3D printing applications: Tuning of thermal, mechanical, morphological and shape memory effect

Flexure Behaviors of ABS-based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing