Abstract:The heat transfer enhancement for phase change materials (PCMs) has received increasing attention nowadays, since most of PCMs have low thermal conductivities which prolong the charging and discharging processes. Metal foams, as a sort of novel material with high thermal conductivity, are believed to be a promising solution to enhance the heat transfer performance of PCMs for thermal energy storage systems.The effects of natural convection on heat transfer enhancement for PCMs embedded with metal foams are investigated in this paper. The numerical investigation is based on the two-equation non-equilibrium heat transfer model, where the coupled heat conduction and natural convection in PCMs are considered at phase transition and liquid zones. The numerical results are validated by experimental data. In order to investigate the effect of metal foams on heat transfer, two different cases are compared in this study, which are the Case A (PCMs embedded with metal foams) and the Case B (pure PCMs). At the solid zone, heat conduction plays a dominant part because of natural convection's absence, thus metal foams achieve much higher heat conduction rate than pure PCMs, and this can be attributed to the high thermal conductivity of metal foams skeleton and the heat can be quickly transferred through the foam solid structure to the whole domain of PCMs. At the two-phase zone and liquid zone, natural convection takes place and becomes the dominant heat transfer mode, but metal foam structures suppress the natural convection inside the PCMs owing to big flow resistance in metal foams. In spite of this suppression caused by metal foams, the overall heat transfer performance of Case A is still superior to the counterpart of Case B (pure PCMs), implying the enhancement of heat conduction offsets or exceeds the natural convection loss. The results show that the heat transfer enhancement due to the natural convection in PCMs embedded with metal foams is not as strong as expected, since metal foams have big flow resistance and the natural convection is suppressed. It also shows that better heat transfer performance can be achieved by using the metal foams of smaller porosity and bigger pore density. Last but not least, a series of detailed velocity and temperature profiles are given through numerical solutions, in order to present a vivid evolution of flow field and temperature profiles in the whole melting process.

Numerical analysis of conjugate convection heat transfer in an open cavity with different phase change materials surrounded by plexiglass

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

A Numerical Investigation of Heat Transfer in Phase Change Materials (pcms) Embedded in Porous Metals

CFD analysis and optimization of nano-enhanced phase change process in multiple port vented cavity equipped with encapsulated PCM under the combined effects of triple rotating cylinders and inclined magnetic field

Thermal Analysis In Phase Change Materials (Pcms) Embedded With Metal Foams

Experimental Investigations on Heat Transfer in Phase Change Materials (pcms) Embedded in Porous Materials

Optimizing of partial porous structure for efficient heat transfer and thermal energy storage of phase change material in a rectangular cavity

Natural Convection Investigations in Porous Phase Change Materials

Numerical analysis of nano-encapsulated PCM convection in partially porous annular cavities: MHD and Soret-Dufour effects

Heat Transfer of Phase Change Materials (pcms) in Porous Materials

Numerical Investigations of Heat Transfer in Phase Change Materials Using Non-Equilibrium Model

Free convection in two composite enclosures filled with water and nano encapsulated phase change particles

Comparison of Two CFD Approaches Using Constant and Temperature Dependent Heat Capacities during the Phase Transition in PCMs with Experimental and Analytical Results

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study

Improving phase change heat transfer in an enclosure filled by uniform and heterogenous metal foam layers: A neural network design approach

Effects of location of nano-enhanced PCM-packed bed on the process of heat transfer and phase transition in a nonuniform magnetic field

Review of Heat Transfer Analysis in Different Cavity Geometries with and without Nanofluids

Characteristics of natural convection in n-eicosane in a square cavity with discrete heat source

Numerical simulation of heat transfer performance in an enclosure filled with a metal foam and nano-enhanced phase change material

Effect of Natural Convection on Charging of Phase Change Materials in Graded Metal Foam: Pore-scale Simulation