Study on material structure design, selective adsorption mechanism, and application for adsorption recovery of oil substances in coal chemical wastewater

Zhuangzhuang Yang,Yongjun Liu,Pan Liu,Lu Yang,Aining Zhang,Zhe Liu,Xiaowei Li,Zhihua Li

DOI: https://doi.org/10.1016/j.chemosphere.2023.140943

IF: 8.8

2023-12-18

Chemosphere

Abstract:In response to the problem of high emulsified and dissolved oils being difficult to recovery from coal chemical wastewater (CCW), this study specifically constructed a non-polar, macropore , and hydrophobic adsorption material (pSt-X) based on the main components of these two oils (aromatics and phenols) for selective recovery. The results revealed that pSt-X had an adsorption capacity of 215.52 mg/g, which had remained stable for multiple recycling sessions, with an adsorption capacity constantly above 95 %. The pSt-X has significantly larger particle size (0.7 mm–1.2 mm), which simplifies the process of adsorption regeneration and effectively prevents the loss of the adsorbent powder problem. The pSt-X adsorbent demonstrated remarkable selectivity towards dissolved and emulsified oils, exhibiting removal rates of 90.2 % and 81.7 %, respectively. Moreover, pSt-X proved remarkable selectivity in removing aromatic hydrocarbons (AHs) and phenols, with impressive removal rates of 77.8 % and 85.9 %, respectively. The selective separation mechanism of pSt-X for oil substances was further analyzed, indicating that its selective adsorption of oils was primarily driven by hydrophobic, π-π, and hydrogen bonding interactions owing to its non-polar and macropore structure and hydrophobic properties. The results of this study provide solid theoretical support for green and low-carbon recovery of oil substances in CCW and are of positive practical importance for clean production in the coal chemical industry.

environmental sciences