Abstract:We present flow‐through experiments to delineate the processes involved in permeability changes driven by effective stress variations and mineral cement dissolution in porous rocks. CO2‐enriched brine is injected continuously into a tight sandstone under in situ reservoir conditions for 455 hrs. Due to the dolomite cement dissolution, the bulk permeability of the sandstone specimen significantly increases, and two dissolution passages are identified near the fluid inlet by X‐ray CT imaging. Prereaction and postreaction examinations of the effective stress law for permeability suggest that after reaction, the bulk permeability is more sensitive to pore pressure changes and less sensitive to effective stress changes. These observations are corroborated by Scanning Electron Microscopy and X‐ray CT observations. This study deepens our understanding of the effect of mineral dissolution on the effective stress law for permeability, with implications for characterizing subsurface mass and energy transport, particularly during fluid injection/production into/from geologic reservoirs. The effective stress law for permeability describes the pore pressure‐effective stress‐permeability relationships and constitutes an essential law in poroelasticity theory. These relationships may change due to chemical fluid‐mineral reactions that modify the geometry of the fluid flow paths. In this work, we conduct laboratory experiments to investigate the evolution of the effective stress law for permeability in a tight sandstone specimen after acid stimulation. Two dissolution passages, formed due to carbonate mineral dissolution, are identified near the injection inlet by X‐ray CT imaging. These passages significantly increase the postreaction specimen permeability and lower the permeability sensitivity to effective stresses. The dissolution of carbonate minerals further exposes previously covered clay minerals to the pore fluid, resulting in a higher sensitivity of pore fluid pressure changes to the bulk permeability. These results are particularly important for geological operations involving fluid injection or production, such as Carbon Capture (Utilization) and Storage (CC(U)S), fluid production, and injection in geothermal systems, oil/gas production, and gas storage. During dolomite dissolution, the specimen's bulk permeability is enhanced, due to the formation of two dissolution passages Permeability is more sensitive to the pore pressure after dolomite dissolution, likely due to the increasing exposure of clay minerals Permeability is less sensitive to the effective stress after reaction, due to high resistance to pore closure in the dissolution passages

Experimental Investigations on the Effect of CaCO3 Precipitation on Permeability Reduction in Single Brown Sandstone Fracture

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

Rock fracture grouting with microbially induced carbonate precipitation

Numerical Study of MICP Infiltration and Mineralization in Unsaturated Soils: CaCO 3 Distribution and Critical Depth

Migration mechanism of grouting slurry and permeability reduction in mining fractured rock mass

An Adjustable Bio-Sealing Method for Rock Fracture Leakage Mitigation

Competing impacts of internal pores dissolution and external compression on the permeability evolution during the infiltration of weakly acidic fluids

Permeability evolution of sandstone caprock transverse fractures during intermittent CO2 injection in coal-bearing strata

Microbial healing of nature-like rough sandstone fractures for rock weathering mitigation

The Effect of Mineral Dissolution on the Effective Stress Law for Permeability in a Tight Sandstone

Effect of Supercritical CO2-Water/Brine-Rock Interaction on Microstructures and Mechanical Properties of Tight Sandstone

Experimental study of microbially induced carbonate precipitation treatment on seafloor sediment of hydrate formation

FIELD EXPERIMENT OF MICROBIAL INDUCED CARBONATE PRECIPITATION TECHNOLOGY IN LEAKAGE TREATMENT OF A BASEMENT

Investigating reactive transport and precipitation patterns of calcium carbonate in fractured porous media

Optimization of deposition process for a productive and cohesive bio-CaCO3 to repair concrete existing cracks

Study on the Influence Mechanism of Calcium Carbonate Particles on Mechanical Properties of Microcrack Cement

Permeability experiment study of calcareous sand treated by microbially induced carbonate precipitation using mixing methods

Study on influencing factors of microbial induced carbonate precipitation in a cross fracture network

Capillary‐Driven Backflow During Salt Precipitation in a Rough Fracture

Grouting effect on rock fracture using shear and seepage assessment

Experimental and simulation study of calcium carbonate non-uniform distribution characteristics of bio-cemented sand