Abstract:The asphalt mixture designed with the Marshall mix design method has stable quality and convenient technical management, but the design range of the asphalt-aggregate ratio is small and difficult to adjust, and is therefore difficult to adapt to the design of functional pavement materials with different requirements. In order to solve these problems, the asphalt-filler volume equivalent substitution method (the volume equivalent substitution method) has been proposed. Based on the optimum asphalt-aggregate ratio of the Marshall method, the asphalt-aggregate ratio in the mixture is increased by the equal volume substitution of asphalt and filler. The increase in the asphalt volume is equal to the decrease in the filler volume, and vice versa. With the condition of constant aggregate gradation, the modified asphalt of asphalt mixtures with filler contents of 6.0%, 4.5%, 3.0%, 1.5%, and 0% is designed based on the AC-13 gradation. Based on this, a high-temperature stability test, a low-temperature crack resistance test, a four-point bending fatigue test, and other tests are carried out for the asphalt mixtures. The results show that the dynamic stability of each mix proportion designed with the volume equivalent substitution method is 4924 times/mm even under the most unfavorable conditions (the filler dose is 0%). The maximum bending tensile strain of the specimen with a 0% filler dosage can reach 9667 μ, which is more than twice that of the specimen with a 6% filler dosage. The fatigue test shows that increasing the asphalt content in the mixture is beneficial for improving fatigue durability. The research results show that the material designed by the volume equivalent substitution method has excellent road performance in each proportion. This paper provides a method for the flexible adjustment of the asphalt-aggregate ratio and the asphalt mixture comprehensive road performance. Using this method, the optimum asphalt-aggregate ratio needs to be determined comprehensively according to the stress characteristics and functional requirements of the pavement and the pavement performance index of the mixture, and further research is still needed.

Research on Material Composition Design of Porous Asphalt Mixture Based on Flyaway Characteristics

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Influence of RAP Dispersion Characteristics on Mixture Performance

State-of-the-art of porous asphalt pavement: Experience and considerations of mixture design

Evaluation and Design of Fiber-Reinforced Asphalt Mixtures

Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method

Study on Compaction Properties and Skeleton Structural Characteristics of Porous Asphalt Mixture

Recycling flue gas desulfurization ash in enhancing the comprehensive moisture susceptibility of asphalt mixtures

Porous Asphalt Design Based on Decreasing Runoff Pollutant

Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement

Recent development and application of natural fiber in asphalt pavement

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Effect of filler on performance of porous asphalt pavement using multiscale finite element method

Effect of Aggregate Gradation and Morphology on Porous Asphalt Mixture Performance

Mesoscopic Mechanical Properties of Aggregate Structure in Asphalt Mixtures and Gradation Optimization

Experimental measurements of the moisture diffusion and strength damage mechanism of dense asphalt mixtures

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Research on the Moisture Stability of Asphalt Mixtures with Three Solid Waste Fillers

The Multi-Objective Optimization Design and Hydrothermal Performance Evaluation of Anhydrous Calcium Sulfate Whisker and Polyester Fiber Compound Modified Asphalt Mixture in Hot-Humid Areas

Performance Enhancement of Porous Asphalt Pavement Using Red Mud As Alternative Filler