Abstract:Overhangs are usually inevitable in Additive Manufacturing (AM). Moreover, making their downward surfaces reach higher accuracy after printing has an imperative impact on improving the accuracy of them and their corresponding as-printed parts. Although extensive studies have been devoted to improving the accuracy of as-printed parts, the effective, general, reliable, and less-consumption (in time and material) approach to make an overhang (especially on its downward surfaces) reach its ideal accuracy is still rare. Hence, a new machine-leaning-based geometric compensation approach is proposed in this study. First, based on the Taguchi method, a series of (overhang) benchmarks are designed and printed to collect the (geometric) deviations of the downward surfaces. With these data, a new deviation predictor is established based on the gaussian process regression model. The predictor can effectively predict the deviation(s) (as well as its corresponding quantified uncertainty) of each downward surface (after printing) by using a pointwise manner. Meanwhile, to make the downward surface of an overhang meet its ideal accuracy (after printing) with high confidence, a specific stochastic chance-constrained programming problem is first formulated to evaluate the new and suitable overhang height of each point on the downward surface. Based on the above-mentioned predictor, the programming problem gets solved by developing a new overhang-height optimization method that integrates the Monte Carlo simulation with the particle swarm optimization. After that, a support structure-associated compensation method is presented to make a pointwise compensation (according to the above-evaluated overhang height) on the downward surface and determine the support structures’ optimized number and anchor positions. Finally, experiments on several representative overhangs are also implemented based on a typical material extrusion machine to validate the effectiveness of the proposed approach. The results show that the proposed approach reduces the deviations of the downward surface by up to 63.92% on average, saving up to 40% of material (less support structures). In addition, methodological comparisons with state-of-the-art approaches are also implemented. The comparisons show that the proposed approach has the great potential to reliably improve the accuracy of the overhang’s downward surface(s) after printing in a less-consumption manner.

Adaptive milling for contours on deformed surface based on on-machine measurement and optimized parallel projection

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Adaptive Optimization Method for Prediction and Compensation of Thin-Walled Parts Machining Deformation Based on On-Machine Measurement

Adaptive sampling method for thin-walled parts based on on-machine measurement

An accelerated convergence approach for real-time deformation compensation in large thin-walled parts machining

Deformation Control in Mesoscale Micro-Milling of Curved Thin-Walled Structures

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Tool path modification based on deformation mapping relationship for the adaptive machining of aero-engine blade

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

A Deformation Control Method in Thin-Walled Parts Machining Based on Force and Stiffness Matching Via Cutter Orientation Optimization

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

A High-Confidence Geometric Compensation Approach for Improving Downward Surface Accuracy

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

Dual-sided co-machining scheme optimization for thin-wall components with complex geometry

Global toolpath modulation–based contour error pre-compensation for multi-axis CNC machining

Machining deformation of single-sided component based on finishing allowance optimization

A digital twin defined autonomous milling process towards the online optimal control of milling deformation for thin-walled parts

A Multi-Scale Tool Orientation Generation Method for Freeform Surface Machining with Bull-Nose Tool