Abstract:The shift of the industrial focus from fuel to chemicals have urged the researchers to obtain a suitable petrochemical feedstock for the FCC unit. Currently, the slurry phase hydroprocessing is a boon for industrialists to upgrade the crude oil using dispersed catalysts. This hydroprocessed crude oil obtained from slurry phase reaction prevents the FCC catalyst unit from getting rapidly poisoned as most of the impurities is removed from the crude oil such as asphaltenes, resins, heavy metal, sulfur etc. This study puts forward the influence of reaction temperature and time on the hydroprocessing of the crude oil. First, the screening of three separate forms of unsupported trimetallic NiMoW catalysts i.e., as-synthesized (CAT1), sulfided (CAT2), and oil-soluble sulfided (CAT3) at 420 °C and 120 bar of hydrogen pressure has been performed. After screening out the best catalyst (CAT3) based on greater conversion results of heavier hydrocarbon fractions to lighter hydrocarbon fractions, further a detailed experimental study for the hydroprocessing of crude oil under hydrogen pressure (120 bar) with varying reaction temperatures (410, 420, 430 °C) and time period (3, 4 and 5 hours) has been carried. With the rise in temperature from 410 to 430 °C, although the higher conversion of heavier fractions is obtained but the increased amount in the coke weight % restricts the use of very high temperatures for slurry hydroprocessing of crude oil. At 420 °C and 120 bar H 2 pressure, CAT1 catalyst shows a reduction in heavy vacuum gas oil (>450 °C) from 20.05 wt% to 11.1 wt%, and rise in middle distillate from 37.02 wt% to 50.4 wt%. When CAT2 catalyst is employed, a decrease in heavy VGO from 20.05 wt% to 9.3 wt% was observed with an increase in the middle distillates from 37.02 wt% to 52.1 wt%. CAT3 catalyst leads to maximum reduction in heavy VGO from 20.05 wt% to 7.1 wt% with an increase in the middle distillates from 37.02 wt% to 55.2 wt%, which shows the importance of oil-soluble catalyst to obtain better quality petro FCC feed. The kinetic study has also been performed for a better understanding of the reaction pathway. Based on the kinetic study, the activation energy associated with each hydrocarbon fraction has been determined and presented in the work. Such detailed study covering all these valuable parameters along with kinetic study has not been presented till now which is the novelty of our work also.

Molecular transformation of heavy oil during slurry phase hydrocracking process: A comparison between thermal cracking and hydrocracking

The Role of Reservoir Mediums in Natural Oil Cracking: Preliminary Experimental Results in a Confined System

Hydrocracking of vacuum residue in a slurry phase reactor: effect of reaction temperature and properties of feedstock

Molecular-refining oriented strategy of catalytic cracking for processing heavy oil

Hydroisomerization Property of Hydrocracking Tail Oil

STUDY ON SYNERGY OF ZEOLITE AND MATRIX AND PROCESS OF HEAVY OIL CRACKING

Hydroisomerization and Hydrocracking of Hydrocracker Bottom for Producing Lube Base Oil

Reaction laws of polycyclic aromatic hydrocarbons and heteroatomic compounds in hydrocracking process

Aromatic Hydrocarbon Generation from A Simulated Bio-Oil Fraction by Dual-Stage Hydrogenation-Cracking: Hydrogen Supply and Transfer Behaviors

Synergistic Catalysis of Water-Soluble Exogenous Catalysts and Reservoir Minerals during the Aquathermolysis of Heavy Oil

Tetralin Hydrocracking Reaction Network to Single-Ring Aromatics on Bifunctional Catalysts

The effect of mild hydrogenation on the catalytic cracking of bio-oil for aromatic hydrocarbon production

Studies on the Preliminary Cracking of Heavy Oils: Contributions of Various Factors

In situ modification of heavy oil catalyzed by nano-sized metal-organic framework at mild temperature and its mechanism

Synergistic Catalysis of Reservoir Minerals and Exogenous Catalysts on Aquathermolysis of Heavy Oil

Advances in Fischer-Tropsch wax hydrocracking process

An inclusive experimental and kinetic understanding of the slurry phase hydroprocessing of crude oil with an active dispersed catalyst to obtain refined fuel

Effect of methane presence on catalytic heavy oil partial upgrading

Selective hydrocracking of light cycle oil into high-octane gasoline over bi-functional catalysts

Kinetic Study of Asphaltenes Phase Separation in Supercritical Water Upgrading of Heavy Oil

Effect of Hydrothermal Process on the Pyrolysis of Oily Sludge: Characterization and Analysis of Pyrolysis Products