Abstract:Reinforced concrete is one of the most commonly used materials in the construction industry. The most and main causes of reinforcement corrosion in concrete structures are chloride attack and carbonation. Many studies have been carried out in this field so far, but due to the multitude of influencing factors and their complexity, different results have been obtained. In this study, reinforced concrete samples were prepared and investigated to monitor the threshold of chloride concentration for corrosion of SD345 carbon steel rebar using the electrochemical impedance spectroscopy (EIS) and half-cell potential (HCP) tests. A series of electrolyte solutions containing different NaCl contents, that is, 0, 1, 2 and 3 wt%, were used to simulate the chloride environment. Given that the HCP values are relatively low for carbon steel rebars, there are a high possibility for corrosion of all samples. By increasing the NaCl content in electrolyte solution, the current density values were increased from the early stages, indicating corrosion enhancement in the samples with increasing chloride ions in solution. The EIS results show that resistance of passive film gradually decreased by increasing the chloride concentration which shows that non-protective corrosion and porous products have been advanced on the surface of steel rebar. Furthermore, the EIS findings indicated an obviously increase of charge transfer resistance and a clearly reduction in the non-ideal interfacial capacitance after 16 weeks exposed to 2 wt% NaCl solution which can be attributed to the high degree of hydration and the efficiently refined the pore structure of the reinforced concretes. Scanning electron microscopy analysis confirmed the results obtained by electrochemical experiments.

On the Impact of Cathodic Polarization on the Chloride Threshold of Carbon Steel in Alkaline Solutions

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Threshold Chloride Concentration of Stainless Steels in Simulated Concrete Pore Solution

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Computational Approach to the Current and Chloride Ions Distribution of Reinforced Concrete Cathodic Protection System

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Chloride Resistance of Cr-bearing Alloy Steels in Carbonated Concrete Pore Solutions

EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions

Analysis of some factors affecting chloride threshold level in simulated concrete pore solution

Electrochemical study on the effect of chloride ions on the passivity of reinforcing steel in simulated concrete pore solutions

Study on the Chloride Threshold and Risk Assessment of Rebar Corrosion in Simulated Concrete Pore Solutions under Applied Potential

Electrochemical Investigations of Steels in Seawater Sea Sand Concrete Environments

Threshold Level of Chloride Ions for Corrosion of SD345 Carbon Steel Reinforcement in Concrete

Study of Crevice Corrosion Behavior and Cathodic Protection of Carbon Steel Reinforcement in Concrete

Critical Chloride Ion Concentration of Steel Fiber Corrosion in Simulated Concrete Pore Solution

Experimental research on chloride threshold level of steel corrosion in simulated concrete solution

Influence of Chloride Ions on Corrosion Behavior of Steel Bars in a Simulated Concrete Pore Solution

Electrochemical dielectric response of steel corrosion induced by chloride in simulated concrete pore solution

Passive Behaviour of New Alloy Corrosion Resistant Steel Cr10Mo1 in Simulating Concrete Pore Solutions with Different Chloride Contents

Study on effect of chloride ions on corrosion behavior of reinforcing steel in simulated polluted concrete pore solutions by scanning micro-reference electrode technique

Determination of the Chloride Threshold Concentration for Reinforcing Steel Corrosion Initiation in Simulated Concrete Pore Solution