Abstract:Magnesium-zinc-calcium (Mg-Zn-Ca) alloys as a biomaterial have attracted much attention recently, owing to their excellent biocompatibility, similar mechanical properties to natural bone, and biodegradable properties. Despite the numerous advantages of MgZnCa alloys, the rapid degradation of magnesium proved challenging as the implant in unable to retain its structural integrity for a sufficient duration of time. For metallic glasses, the capability to produce a bulk sample that is sufficiently large for useful applications have been far less successful owing to challenging processing parameters that are required for rapid cooling. In this study, Mg65Zn30Ca5 melt-spun ribbons were produced using melt-spinning followed by spark plasma sintering under high pressure (60 MPa) at different temperatures (130–170 °C) to provide an insight into the consolidation, mechanical, and corrosion behavior. Microstructural interfaces were characterized using scanning electron microscopy while the thermal stability of the amorphous phase was characterized using differential scanning calorimetry and X-ray diffraction. Here, pellets with 10 mm diameter and 10 mm height with a complete amorphous structure were achieved at a sintering temperature of 150 °C with densification as high at ~98%. Sintering at higher temperatures, while achieving higher densification, resulted in the presence of nano-crystallites. The mechanical properties were characterized using microhardness and compression tests. The hardness values of the sintered products were relatively higher to those containing crystallite phases while the ultimate compressive strength increased with increasing sintering temperature. Bio-corrosion properties were characterized via electrochemical testing with PBS as the electrolyte at 37 °C. The corrosion results suggest that the sintered samples have a significantly improved corrosion resistance as compared to as-cast samples. More notably, SPS150 (samples sintered at 150 °C) exhibited the best corrosion resistance (35× compared to as-cast in the context of corrosion current density), owing to its single-phase amorphous nature. This study clearly shows the potential of spark plasma sintering in consolidating amorphous ribbons to near-full density bulk pellets with high corrosion resistance for bio-applications.

Self-supporting electrodes obtained by electrochemical dealloying of Zr-based metallic glass alloys for energy storage applications

Electrochemical Performance and Hydrogen Storage of Ni-Pd-P-B Glassy Alloy

3D Lithiophilic CuZrAg Metallic Glass Based‐Current Collector for High‐Performance Lithium Metal Anode

Electrochemical surface nanostructuring of Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 metallic glass for improved pitting corrosion resistance

The effect of partial substitution of Zr for Ti on the electrochemical properties and surface passivation film of Mg35Ti10 - xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys

Effect of Copper Content on Glass -Forming Ability and Corrosion Resistance of Novel A1NiZrCoYSi High Entropy Amorphous Alloy

A Self‐Supported High‐Entropy Metallic Glass with a Nanosponge Architecture for Efficient Hydrogen Evolution under Alkaline and Acidic Conditions

Nanoporous Metal by Dealloying for Electrochemical Energy Conversion and Storage

An Ultrafast and Stable High-Entropy Metallic Glass Electrode for Alkaline Hydrogen Evolution Reaction

Metallic amorphous alloy for long-term stable electrodes in organic sensors and photovoltaics

Development of Biocompatible Bulk MgZnCa Metallic Glass with Very High Corrosion Resistance in Simulated Body Fluid

Progress and Perspective of Metallic Glasses for Energy Conversion and Storage

Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass

A Novel Ni-Free Zr-Based Bulk Metallic Glass with High Glass Forming Ability, Corrosion Resistance and Thermal Stability

Microstructure and Corrosion Resistance of a Novel AlNiLa Lightweight Medium Entropy Amorphous Alloy Composites

Entanglement Added to Cross-Linked Chains Enables Tough Gelatin-Based Hydrogel for Zn Metal Batteries

Biodegradable Mg–Zn–Ca–Y Glass-Forming Alloy with an Amendment in Mechanical Properties and Corrosion Resistance

A highly polarizable concentrated dipole glass for ultrahigh energy storage

Properties of Amorphous Mg 65 Ni 10 RE 25 (re=la, Ce, Pr, Nd, Mm) Hydrogen Storage Alloys Electrode

Dealloyed nanoporous materials for electrochemical energy conversion and storage

Ductile behavior and excellent corrosion resistance of Mg-Zn-Yb-Ag metallic glasses