Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

A hybrid approach using multiple linear regression and random forest regression to predict molten steel temperature in a continuous casting tundish

Application of improved EMD-Elman neural network to predict silicon content in hot metal

Consistent Optimization of Blast Furnace Ironmaking Process Based on Controllability Assurance Soft Sensor Modeling.

Research on temperature prediction model of molten steel of tundish in continuous casting

A novel hybrid intelligent model for molten iron temperature forecasting based on machine learning

Temperature Control Optimization in a Steel‐Making Continuous Casting Process Using a Multimodal Deep Learning Approach

TSC prediction and dynamic control of BOF steelmaking with state-of-the-art machine learning and deep learning methods

Heat-loss cycle prediction in steelmaking plants through artificial neural network

Molten Steel Temperature Prediction in Ladle Furnace Using a Dynamic Ensemble for Regression

Machine learning algorithms for the prediction of the strength of steel rods: an example of data-driven manufacturing in steelmaking

Prediction of Mechanical Properties of Steel Tubes Using a Machine Learning Approach

Artificial Neural Network Model for Temperature Prediction and Regulation during Molten Steel Transportation Process

Monitoring of the refractory lining in a shielded electric arc furnace: An online multitarget regression trees approach

Studies on Parameters Affecting Temperature of Liquid Steel and Prediction Using Modified AdaBoost.RT Algorithm Ensemble Extreme Learning Machine

Intelligent predictive modeling of blast furnace system

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

Data‐Driven Approach using Supervised Learning for Predicting Endpoint Temperature of Molten Steel in the Electric Arc Furnace

Novel Online Prediction Model for Thermal Convexity of Work Rolls During Hot Steel Rolling Based on Machine Learning Algorithms

Data Driven Performance Prediction in Steel Making

Predicting Temperature of Molten Steel in LF-Refining Process Using IF–ZCA–DNN Model

Intelligent Prediction of Oxygen Consumption in Steelmaking Based on Random Forest Method