Abstract:We study the global hydrodynamic performance of a semi-submersible floating platform unit in order to optimize the hull form in the future. The hydrodynamic problem is solved by employing potential flow theory and Morison equation for modelling of the viscous effects. The added mass and damping coefficients, as well as the first-order motion responses, second-order mean drift forces, diffracted and radiated wave field, and airgap are computed to examine the hydrodynamic behavior of the floating production unit. The computational results show that the motion responses in short-crested waves are mostly smaller than those in long-crested waves. The maximum wave elevation occurs at WP45 in 45 degrees wave heading in long-crested waves. In addition, the minimum airgap occurs at AG45 in 45 degrees wave heading in linear waves, while the worst airgap point in nonlinear waves is AGO in 0 degrees wave heading.Extensive parametric studies have been performed to examine the dependence of the motion responses and the other key design criteria on the principal dimensions including hull draft, column width, column spacing, column corner radius, pontoon height, pontoon width, and the size of cakepiece. By comprehensive and systematic hydrodynamic computations and analyses, it is revealed that the combined vertical motion at the worst airgap location is almost in phase with the wave elevation in extreme wave condition with a peak wave period around 14-15 s. Moreover, it is found that the most efficient way to reduce the motion is to increase the hull draft, though the airgap may also decrease. Besides, reducing the pontoon height can achieve better motion performance and larger airgap simultaneously. This paper aims to provide a benchmark for future studies on automatic hull form optimization.

Navigational water resistance analysis and optimization of the gondola of unmanned boat retractable device

Structure Designation and Dynamic Model Analysis of Folding Wing for Underwater Vehicles

Design and Analysis of Co-axial Twin-Propeller Trans-media Vehicle.

The Shape Design Optimization Simulation of Quadrotor Unmanned Underwater Vehicle for Drag Reduction

The Anti Swing Strategy of Davit System to Unmanned Surface Vehicle at Sea

The Design of a Novel Small Waterplane Area Pillar Buoy Based on Rolling Analysis

RESEARCH ON DRAG REDUCTION CHARACTERISTICS OF UNDERWATER VEHICLE FORE REGION WITH SHORT GROOVE STRUCTURES

Drag reduction configuration analysis of the grooves on amphibious vehicles walking mechanism

Motion characteristics and T-foil based optimization of marine towed-cage in swell

Analysis and optimization of self-propelled performance of wave-driven vehicle hydrofoil under high sea-level condition

Design and Control of the "TransBoat": A Transformable Unmanned Surface Vehicle for Overwater Construction

Optimization of Center of Gravity Position and Anti-Wave Plate Angle of Amphibious Unmanned Vehicle Based on Orthogonal Experimental Method

Experimental Study on Autonomous Docking and Hook-Locking Control for Unmanned Surface Vehicle Platforms

Comparative Investigation of an Automated Oceanic Wave Surface Glider Robot Influence on Resistance Prediction Using CFD Method

Maneuverability prediction of the wave glider considering ocean currents

Hull Form and Hydrodynamic performance of a New Type of High-Speed Unmanned Surface Vehicle

The Analysis Method of Performance Comprehensive Performance Optimization Design for Multi-body Unmanned Boat

Hull form optimization for the roll motion of a high-speed fishing vessel based on NSGA-II algorithm

Anti-rolling analysis and resistance optimization of a new anti-rolling hydrofoil for the trimaran vessel

USRV: hydrodynamic analysis and design of a novel anti-flow underwater search and rescue vehicle with circuit control and perception system

Global Motion and Airgap Computations for Semi-Submersible Floating Production Unit in Waves