Abstract:Highlights A critical torque of 0.257 N-m is required to detach 95% of apples, when the preferred twist picking mode is used. New silicone-based end effectors performed much better than the original, non-conformable end effector. The straight end effector had the best overall picking performance with 87% picking success rate. The new vacuum-based harvesting robot looks promising for automated harvesting of apples. Abstract. The end effector plays a critical role in fruit picking by a robotic fruit harvesting system. A newly developed vacuum-based robotic apple harvesting system, using the twist-and-pull fruit picking method, has shown promise in picking fruit from clusters and navigating through the tree canopies. The robot’s original thin foam end effector failed to achieve acceptable picking performance because it was unable to conform to fruit of different sizes and thus could not generate sufficient suction forces needed to detach fruit. This research was therefore aimed at developing new end effectors to greatly enhance the robot’s fruit picking performance. Field manual pulling and twisting experiments for three varieties of apples were conducted, and the critical pulling or suction force and twisting torque needed to detach 95% of apples were determined to be 28.3 N and 0.257 N-m (equivalent to a pulling force of 21.0 N for the current robot’s configuration), respectively. Three new silicone-based end effectors of different geometries (denoted as “Straight”, “Bellow” and “Curved”) were designed and fabricated, and they were evaluated in lab and field experiments. Results showed that the three new end effectors performed significantly better than the original, unconformable end effector based on multiple performance metrics, including vacuum pressure, overall picking success rate, picking rate by the rotation mechanism, and fruit attachment orientation. The “Straight” end effector performed consistently better than the other two new end effectors; it had 87% overall picking success rate, 65% success rate by the rotation mechanism alone, and 89% success rate when the middle section or cheek of fruit attached to the end effector. With further improvements, the “Straight” end effector should meet the apple picking performance requirement for the new vacuum-based robotic harvesting system. Keywords: Apple, End Effector, Fruit, Harvest, Robotics, Vacuum.

Current Status of Patent Research on Picking End Effector

Research Status and Development Direction of Design and Control Technology of Fruit and Vegetable Picking Robot System

Picking patterns evaluation for cherry tomato robotic harvesting end-effector design

Review of End-effectors in Fruit and Vegetable Harvesting Robot

Design and Evaluation of End Effectors for a Vacuum-Based Robotic Apple Harvester

Recent Patents for Collection Device of Fruit Harvesting Machine

End effector of apple picking robot

Design of an End-effector with Application to Avocado Harvesting

Research Progress on End-effectors of Agricultural Robot

A review on structural development and recognition–localization methods for end-effector of fruit–vegetable picking robots

Design of Flexible Spherical Fruit and Vegetable Picking End-effector Based on Vision Recognition

Design and Testing of an End-Effector for Tomato Picking

Robotic Manipulation for Specialty Crop Harvesting: A Review of Manipulator and End-Effector Technologies

Tendon Actuation Device Based On Underactuation Apple Lossless End Effector

Review of smart robots for fruit and vegetable picking in agriculture

Design and development of a peduncle-holding end effector for robotic harvesting of mango

Research on the Bionic Flexible End-Effector Based on Tomato Harvesting

Optimization and Experimental Study of Bionic Compliant End-effector for Robotic Cherry Tomato Harvesting

Design, simulation, and experiment for the end effector of a spherical fruit picking robot

Understanding the Dynamics of Hand Picking Patterns of Fresh Market Apples

Optimization and experimental study on structural parameters of bio-inspired tarsus compliant end-effector to reduce the risk of fruit sliding out from end-effector for cherry tomato harvesting