Abstract:From the functional point of view, the intersection is the most complex element of the road network. It is here that the traffic flows in different directions cross, and various maneuvers take place. This indicates that the intersection is a place with an increased concentration of conflict situations and an increased risk of traffic accidents. At most high-flow intersections, traffic is controlled by traffic lights, and their inefficient operation can lead to unnecessarily long wait times and overall increase in traffic delays. The research analyzed a regulated intersection at the crossing of Stepana Bandery and Viacheslava Chornovola main streets in the city of Rivne. This intersection is characterized by constant significant traffic jams. To simulate traffic conditions at this intersection, the research used PTV Vissim software. Observations of traffic flows, their distribution by directions, and traffic light regulation parameters were used as initial data for modeling the intersection traffic scheme. The main problem that must be solved when considering isolated traffic light intersections is the calculation and optimization of the signal plan, which involves: determining the number of phases; determining cycle duration; distribution, i.e. determining parts of available green time for each phase; modeling of traffic situations that may arise due to the passage of priority vehicles, congestion of vehicles in intersection areas during peak periods or other situations. At the same time, it is necessary to achieve the best possible characteristics of the intersection functioning. According to the research results, the road conditions were modeled and the signal plan was optimized with the use of PTV Vissim software. Simulation modeling of the intersection included drawing a road network, installing traffic lights (signal controllers) with a description of their work (choosing the type of light signaling devices, creating signal groups and traffic light signals, parameters for coordinating signals), forming pedestrian zones and a node, performing calculations with subsequent analysis of the received data. In order to improve the efficiency of the intersection, two options for the operation of the traffic light controllers are offered: 1. Lengthening of the “green” phase, for the convenience of turning to the left (by reducing the phase of oncoming traffic in one direction by 5 seconds). The total duration of the cycle of 70 seconds will not change; 2. Implementation of the third phase – fully pedestrian in all directions, lasting 20 seconds. The total duration of the cycle will increase to 90 seconds. A more progressive measure can be the introduction of adaptive systems, which are based on new traffic monitoring technologies and allow obtaining accurate data on traffic flows in real time and performing adaptive control of traffic lights, that is, adapting the signal plan in real time to changes in traffic flows.

Simulation of vehicle traffic at exit from the adjacent territory to main streets

Based on Simulation Method for Solving Traffic Jam Problems.

Motorway Traffic Surveillance and Control

IMPROVING THE EFFICIENCY OF TRAFFIC LIGHT CONTROL AT ROAD INTERSECTIONS

Simulation modeling as a tool for predicting pedestrian flows when planning a Moscow Metro surface station

SIMULATION OF THE TRAFFIC PROCESS ON THE MAIN STREET OF VORONEZH IN THE ANY LOGIC SOFTWARE ENVIRONMENT

A COMPARATIVE STUDY OF HEADWAY-BASED AND TRANSPORT SYSTEM-BASED ASSIGNMENTS OF PUBLIC TRANSPORT IN VISUM: THE CITY OF KRYVYI RIH CASE

APPLICATION OF TRANSPORT MODELING IN URBAN PLANNING USING THE EXAMPLE OF VINNYTSIA

Comparative study on simulation performances of CORSIM and VISSIM for urban street network.

Development of an economic and information system for the optimization of city traffic flows

Assessment of impact of priority movement for urban public passenger transport on the quality of passenger service

INTELLIGENT TRANSPORT SYSTEMS AS TRAFFIC FLOW MANAGEMENT TOOL (THE CASE OF KYIV)

Analysis of Traffic Characteristics and Distance Optimization Design between Entrances and Exits of Urban Construction Projects and Adjacent Planar Intersections

Analysis of methods for accounting cargo vehicles in traffic flow of a regulated crossroad

Modeling the Operation of Signal-Controlled Intersections with Different Lane Occupancy

DEVELOPMENT OF THE CITY PUBLIC SERVICE MODEL ON THE BASIS OF INTEGRATED TRANSPORT FLOW INDICATORS

Simulation of the Frontage Road Control Near the Expressway Exit Ramp

Simulation of traffic flow control using S-hypernetwork

Increasing the environmental safety of the motor transport complex by optimizing traffic on emergency road sections

Traffic flow model based on real data

Modeling of urban road network traffic carrying capacity based on equivalent traffic flow