Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Improving the Integrated Process of First- and Second-Generation Ethanol Production with Multiperiod Energy Integration

Simultaneous Optimization and Integration of Multiple Process Heat Cascade and Site Utility Selection for the Design of a New Generation of Sugarcane Biorefinery

Biomass-ethanol Supply Chain Optimization: Dynamic Facility Location Planning under Changing Supply and Demand

First‐ and second‐generation integrated process for bioethanol production: Fermentation of molasses diluted with hemicellulose hydrolysate by recombinant Saccharomyces cerevisiae

Studies on the Integration of 1.5th and 2nd Generation Fuel Ethanol Production from Sweet Sorghum Stalks: Economic Performance, Energy Consumption and Carbon Emissions

Techno-economic evaluation of integrated first- and second-generation ethanol production from grain and straw

Bioelectricity versus bioethanol from sugarcane bagasse: is it worth being flexible?

Performance Evaluation of Adding Ethanol Production into an Existing Combined Heat and Power Plant.

Impact of Product Diversification on the Economic Sustainability of Second-Generation Ethanol Biorefineries: A Critical Review

Techno-Economic Analysis of an Integrated Biorefinery System for Poly-Generation of Power, Heat, Pellet and Bioethanol

Process Systems Engineering Approach for the Sustainable Design of Cyanobacteria-Based Integrated Biorefineries and Their Heat Exchanger Network

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol

The Assessment of the Operational Performance of a Dry Anaerobic Reactor of Cambuci Husks to Bioenergy Potential and Biorefinery Integration

Economic and environmental assessment of the retrofitting of a first-generation ethanol plant

Supply Chain Optimization of Sugarcane First Generation and Eucalyptus Second Generation Ethanol Production in Brazil

Economic value and environmental impact analysis of lignocellulosic ethanol production: assessment of different pretreatment processes

Comparison of Spathaspora passalidarum and recombinant Saccharomyces cerevisiae for integration of first- and second-generation ethanol production

Decrease of energy demand for bioethanol-based polygeneration system through case study

Neither 1G nor 2G fuel ethanol: setting the ground for a sugarcane-based biorefinery using an iSUCCELL yeast platform

Energy recovery from sugarcane biomass residues: Challenges and opportunities of bio-oil production in the light of second generation biofuels

Optimization and Tradeoff Analysis for Multiple Configurations of Bio-Energy with Carbon Capture and Storage Systems in Brazilian Sugarcane Ethanol Sector