Abstract:Study of the processes of solid-phase reduction of iron from oxides using coals as reducing agents and the development of energy-efficient technologies for the production and use of metallized materials from concentrates obtained as a result of hydrometallurgical enrichment is an actual scientific direction in ferrous metallurgy. Theoretical studies of the processes of solidphase reduction of iron from iron-containing concentrate obtained as a result of hydrometallurgical enrichment of ferromanganese and polymetallic manganese-containing ores, by coals grades D (long-flame) and 2B (brown) were carried out by the method of thermodynamic simulation using the “Terra” software complex. The experimental study of the process of solid-phase reduction of iron from experimental mixtures was carried out in a muffle furnace SNOL 4/900 and in a resistance furnace with a graphite tubular heater (Tamman furnace). The influence of the composition and volume of gas phase, formed as a result of volatile components emission in the process of coals of two grades heating at 373–1873 K obtained, optimal temperature and consumption of coals defined, which ensure complete reducing of iron from iron-containing concentrate, compositions as well as volumes of gas phase. The influence of temperature of the isothermal exposure on the rate and degree of solid-phase reduction of iron from iron ore oxides was experimentally determined when using coals of different process grades and coke fines as reducing agents. Empirical equations of reduction degree versus time of isothermal exposure for different metallization temperatures were obtained. It is shown that the change in the degree of recovery on temperature with high accuracy was described by a linear dependence, and the change in the recovery rate on the temperature – by a power dependence. Conditions of effective metallization were determined when using iron concentrate and coals of different process grades for production of spongy metallized materials with content of Femet more than 80%, and 1.5–2.5 % C, 0.1 % S, 0.02 % P. As a result of thermodynamic simulation and experimental study of the process of iron reduction from iron concentrate, optimal consumption of coal of grades D and 2Б at temperature 1473K was determined. It was established that the best reducing agent with a minimum specific consumption is long-flame coal grade D. It was found that with an excess of reducing agent, it is possible to achieve almost complete extraction of iron from the concentrate, at the level of 98–99%.

Improvement of production technology and improvement of quality characteristics of complex flux

Application of manganous limestone as a fluxing addition at pellets production

Efficiency Upgrading for Blast Furnace Smelting through Use of Iron Ore Raw Materials with Various Fluxing Degree

Complex Processing of Copper Smelting Slags with Obtaining of Cast Iron Grinding Media and Proppants

An Improved Process for the Production of Low-Carbon Ferromanganese in the Electric Arc Furnace

APPLICATION OF BARIUM-STRONTIUM CARBONATITE FOR PRODUCTION OF WELDING FLUXES BASED ON SILICOMANGANAZE PRODUCTION SLAG

PROSPECTS FOR THE USE OF OUT-OF-FURNACE CAST IRON REFINING TECHNOLOGIES IN THE CONTEXT OF DOMESTIC METALLURGICAL PRODUCTION

COMPREHENSIVE WASTE-FREE PROCESSING TECHNOLOGY OF COPPER SMELTING SLAGS

Development of Charge Pelletizing Technology Based on Electric Arc Furnace Dust for Pyrometallurgical Processing in Rotary Kilns

Investigation of the process of metallized materials production from iron concentrate of hydrometallurgical enrichment of ferromanganese ores of Kuzbass

Technology of converter blowing and using limestone for slagging

Combustion behavior of co-injecting flux, pulverized coal, and natural gas in blast furnace and its influence on blast furnace smelting

A Strategy for Partial Replacement of Lime by Limestone and Its Impact on Basic Oxygen Furnace Steelmaking

Modern concepts of refractory materials application in production of steel and cast iron

Desulphurization of Hot Metal and Ferronickel with Calcium Aluminate Fluxes

Ferrochrome Production in a Submerged Electric Arc Furnace: Fundamental Analysis Based upon the FactSage‐Macro Program Approach

SCHEMATIC DIAGRAM OF THE MODEL OF END-TO-END TECHNOLOGY FOR THE PRODUCTION OF COMPETITIVE METAL PRODUCTS BY UKRAINIAN ENTERPRISES OPERATING IN UNSTABLE RAW MATERIALS AND ENERGY CONDITIONS

Ladle-Furnace-Slag Reprocessing at Evraz Nizhnii Tagil Iron and Steel Works OJSC

Information and mathematical support of cast iron desulfurization technology

On the issue of complex processing of phosphorous iron ores

Formation of optimal slag composition in ladle furnace for improvement of desulfurization properties and optimization of consumption of slag-forming materials