Quantum dot-enabled infrared hyperspectral imaging with single-pixel detection

Heyan Meng,Yuan Gao,Xuhong Wang,Xianye Li,Lili Wang,Xian Zhao,Baoqing Sun

DOI: https://doi.org/10.1038/s41377-024-01476-4

2024-05-29

Light Science & Applications

Abstract:Near-infrared (NIR) hyperspectral imaging is a powerful technique that enables the capture of three-dimensional (3D) spectra-spatial information within the NIR spectral range, offering a wide array of applications. However, the high cost associated with InGaAs focal plane array (FPA) has impeded the widespread adoption of NIR hyperspectral imaging. Addressing this challenge, in this study, we adopt an alternative approach—single-pixel detection for NIR hyperspectral imaging. Our investigation reveals that single-pixel detection outperforms conventional FPA, delivering a superior signal-to-noise ratio (SNR) for both spectral and imaging reconstruction. To implement this strategy, we leverage self-assembled colloidal quantum dots (CQDs) and a digital micromirror device (DMD) for NIR spectral and spatial information multiplexing, complemented by single-pixel detection for simultaneous spectral and image reconstruction. Our experimental results demonstrate successful NIR hyperspectral imaging with a detection window about 600 nm and an average spectral resolution of 8.6 nm with a pixel resolution of 128 × 128. The resulting spectral and spatial data align well with reference instruments, which validates the effectiveness of our approach. By circumventing the need for expensive and bulky FPA and wavelength selection components, our solution shows promise in advancing affordable and accessible NIR hyperspectral imaging technologies, thereby expanding the range of potential applications.

optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to reduce the equipment cost and improve the signal - to - noise ratio (SNR) in near - infrared (NIR) hyperspectral imaging, so as to achieve more extensive applications. Specifically:

1. **Cost reduction**: Traditional NIR hyperspectral imaging systems usually rely on expensive InGaAs focal plane arrays (FPA), which limits their wide application. This paper proposes a single - pixel detection - based method, using self - assembled colloidal quantum dots (CQDs) and digital micromirror devices (DMD) to multiplex spectral and spatial information, thus bypassing the need for expensive FPA.

2. **Performance improvement**: It has been found that single - pixel detection shows a better SNR in spectral and image reconstruction than traditional FPA. By using CQDs as filters, higher spectral resolution and better noise tolerance can be achieved.

3. **Expansion of application range**: By reducing the equipment cost and improving the performance, this method is expected to make NIR hyperspectral imaging technology more popular and suitable for more application scenarios, such as chemical analysis, material identification, quality control, etc.

### Main contributions

- **Advantages of single - pixel detection**: Compared with traditional FPA, single - pixel detection shows stronger robustness in a high - noise environment and can reconstruct spectra and images more accurately.
- **Use of CQD filters**: By adjusting the size and chemical composition of CQDs, their absorption characteristics can be continuously adjusted, thereby achieving broadband filtering from ultraviolet to mid - infrared. This provides a convenient and cost - effective solution for manufacturing broadband filters.
- **Application of compressed sensing algorithms**: By using compressed sensing algorithms such as Generalized Alternating Projection - based Total Variation (Gap - TV), hyperspectral images can be efficiently reconstructed at a lower sampling rate, further improving the performance and practicality of the system.

### Experimental results

- **Noise tolerance**: Through simulation experiments, the performance of single - pixel detection at different noise levels has been verified, and the results show that it can still maintain high - quality image and spectral reconstruction in a high - noise environment.
- **Spectral resolution**: Using 50 CQD filters, spectral reconstruction in the wavelength range from 1050 nm to 1630 nm has been achieved, with an average spectral resolution of 8.59 nm.
- **Practical applications**: By measuring samples such as NIR LEDs, water and oleic acid solutions, strawberries and citrus fruits, the effectiveness and reliability of this system in practical applications have been demonstrated.

In conclusion, through the introduction of single - pixel detection and CQD filters, this research has successfully solved the problems of high cost and insufficient performance in NIR hyperspectral imaging, providing a new way for the popularization and application of this technology.