Abstract:Three-dimensional (3D) perovskites have been demonstrated as an effective strategy to achieve efficient light-emitting diodes (LEDs) at high brightness. However, most 3D perovskite LEDs still suffer from serious efficiency roll-off. Here, using FAPbI3 as a model system, we find that the main reason for efficiency droop and degradation in 3D perovskite LEDs is defects and the ion migration under electrical stress. By introducing bifunctional-molecule 3-chlorobenzylamine additive into the perovskite precursor solution, the detrimental effects can be significantly suppressed through the growth of high crystalline perovskites and defect passivation. This approach leads to bright near-infrared perovskite LEDs with a peak external quantum efficiency of 16.6%, which sustains 80% of its peak value at a high current density of 460 mA cm–2, corresponding to a high brightness of 300 W sr–1 m–2. Moreover, the device exhibits a record half-lifetime of 49 h under a constant current density of 100 mA cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.nanolett.0c04900?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.nanolett.0c04900</a>.Experimental details, optoelectronic characteristics of 3Cl-BA- or BA-based FAPbI3 films and LEDs, XRD data, XPS spectra, SFG resonance, and performance comparison between our device and other high-performance NIR perovskite LEDs (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c04900/suppl_file/nl0c04900_si_001.pdf">PDF</a>)(Movie S1) temperature of the control device under various voltages (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c04900/suppl_file/nl0c04900_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Optical Engineering of FAPbBr3 Nanocrystals via Conjugated Ligands for Light‐Outcoupling Enhancement in Perovskite Light‐Emitting Diodes

Growth of Nano-Sized Single Crystals for Efficient Perovskite Light-Emitting Diodes.

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Fluoride Interfaces Enhance the Performance of Perovskite Light-emitting Diodes

Deep‐Red Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 21% Enabled by Ligand‐Modulated Dimensionality Control

High-Efficiency Formamidinium Lead Bromide Perovskite Nanocrystal-Based Light-Emitting Diodes Fabricated via a Surface Defect Self-Passivation Strategy

Performance-optimized and Phase Purity-Improved High-N Quasi-Two-dimensional Perovskite for Green Light-Emitting Diodes

Marked Efficiency Improvement of FAPb0.7Sn0.3Br3 Perovskite Light-Emitting Diodes by Optimization of the Light-Emitting Layer and Hole-Transport Layer

High-Brightness Perovskite Light-Emitting Diodes Based on FAPbBr3 Nanocrystals with Rationally Designed Aromatic Ligands

Ligand Engineering Achieves Suppression of Temperature Quenching in Pure Green Perovskite Nanocrystals for Efficient and Thermostable Electroluminescence

Enhanced stability and performance of light-emitting diodes based on<i>in situ</i>fabricated FAPbBr<sub>3</sub>nanocrystals<i>via</i>ligand compensation with<i>n</i>-octylphosphonic acid

Amphoteric Chelating Ultrasmall Colloids for FAPbI3 Nanodomains Enable Efficient Near-Infrared Light-Emitting Diodes

Aromatic 2,2-Diphenylethylamine Ligand Exchange of FA 0.9 Cs 0.1 PbBr 3 Perovskite Nanocrystals for High-Efficiency Pure Green Light-Emitting Diodes

Dual Ligands Synergism Strategy for Fabrication of Highly Luminescent FAPbBr3 Nanocrystal Films and Efficient Electroluminescent Devices

Low Roll-Off and High Stable Electroluminescence in Three-Dimensional FAPbI 3 Perovskites with Bifunctional-Molecule Additives

Improving Crystallinity and Out‐of‐Plane Orientation in Quasi‐2D Ruddlesden‐Popper Perovskite by Fluorinated Organic Salt for Light‐Emitting Diodes

Engineering Perovskite Nanocrystal Surface Termination for Light‐Emitting Diodes with External Quantum Efficiency Exceeding 15%

High Brightness Formamidinium Lead Bromide Perovskite Nanocrystal Light Emitting Devices.

FAPbBr 3 /Cs 4 PbBr 6 Core/Shell Perovskite Nanocrystals with Enhanced Stability and Emission: Implications for LEDs

Enhancing the Brightness of Cesium Lead Halide Perovskite Nanocrystal Based Green Light-Emitting Devices through the Interface Engineering with Perfluorinated Ionomer.

Suppressed Thermal Quenching via Tetrafluoroborate-Induced Surface Reconstruction of CsPbBr3 Nanocrystals for Efficient Perovskite Light-Emitting Diodes