Abstract:The ocean contains a large amount of marine current energy which is considered to be one of the most promising renewable energy sources for commercialization. In contrast to the high-velocity currents in straits close to the mainland or islands, the velocities of the currents in most of the sea are low. The exploitation of low-velocity currents is of great significance to the regions with such energy sources. Although the technology for harvesting marine current energy is developing rapidly, the exploitation of low-velocity current energy is often neglected due to its low power density. When the existing marine current turbine (MCT) technology developed for high-velocity currents is used for low-velocity currents, it will result in large rotor diameters and low performance of starting current velocities, which is subject to the water depth and the levelized cost of energy. To solve those problems, a direct-drive parallel-axis twin-rotor marine current turbine (TRMCT) was developed in this research, with a focus on the design of the transmission and generator of the MCT, as well as the improvement of the control strategy. Firstly, the structure of the TRMCT and its characteristics were given. Secondly, the improved optimal torque control strategies for the TRMCT were designed. Finally, to verify the feasibility of the TRMCT and its control strategy, the mathematical model was built and simulated, and the starting performance and operating performance were analyzed. The results show that the proposed TRMCT can start to work at about 0.2 m/s and the conversion efficiency of the whole system can reach about 25%. Compared to the scheme using two identical single-rotor MCTs, the TRMCT's output power can increase by up to 26%. Besides, the torque imbalance caused by the difference in the current velocities on the two rotors can be well coped with.

A novel continuously variable-speed offshore wind turbine with magnetorheological transmission for optimal power extraction

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Output Power Control for Hydro-Viscous Transmission Based Continuously Variable Speed Wind Turbine

A Novel Hydraulic Transmission Solution to Large Offshore Wind Turbine: Design and Control Strategy

A Novel Hydraulic-Mechanical Hybrid Transmission in Tidal Current Turbines

Design and Tests of a Marine Current Turbine in Low Flow Velocity

Coordinated Power and Structural Load Optimization for Offshore Wind Turbines with Nonlinear Model Predictive Generator Torque Control

Hybrid Power Transmission Technology in a Wind Turbine Generation System

An Improved Optimal Torque Control Based on Estimated Wind Speed for Wind Turbines

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Mitigation of Side-to-side Vibration of a 10MW Monopile Offshore Wind Turbine under Misaligned Wind and Wave Conditions by an Active Torque Control

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

Control of wide-speed-range operation for a permanent magnet synchronous generator-based wind turbine generator at high wind speeds

Design and Test of a 600-Kw Horizontal-Axis Tidal Current Turbine

Improving the Reliability and Energy Production of Large Wind Turbine with a Digital Hydrostatic Drivetrain

An offshore hydraulic wind turbine generator with variable-diameter rotor: Design, modeling and experiment

Experimental and Numerical Analysis of Power Take-off Control Effects on the Dynamic Performance of a Floating Wind-Wave Combined System

A Novel Synchronous Type Variable Speed Wind Turbine and Its Control Strategy Study

Design and control of a parallel-axis twin-rotor counter-rotating marine current turbine for the shallow sea conditions

Design and Optimization of Electric Continuous Variable Transmission System for Wind Power Generation