Abstract:For low costs, numerical simulation is an effective method to reveal the internal mechanisms inside a thermal plasma torch. Various simulation models for studying the inside or outside characteristics of thermal plasma torches have been built and discussed. However, to reveal the inside mechanisms of thermal plasma torches under various working conditions to support the materials processing, more attention should be paid to building precise models of laminar plasma torches. Thus, based on the user-defined function (UDF) and user-defined scalar (UDS) of ANSYS Fluent software, the assumptions, governing equations, boundary conditions, and solving method were discussed in detail, and a corresponding numerical model of a homemade laminar plasma torch was first built. For verifying the effectiveness of the proposed numerical model and studying the influence of the gas components on the arc characteristics, the working conditions and experimental setups were introduced in sequence. Finally, the numerical and experimental results of the homemade laminar plasma torch were obtained and discussed in detail. The study results show that: 1 The axial temperature of the plasma torch could be divided into three sections along the axis: peak temperature area (10 mm < x < 20 mm), stable temperature area (20 mm < x < 62 mm) and decrease temperature area (62 mm < x < 95 mm). Under the same input conditions, when pure argon gas was used, the peak temperature at the outlet was reached at approximately 7590 K, while for pure nitrogen and 50%Ar + 50%N2, the corresponding peak temperatures were 6785 K and 7402.2 K, respectively. 2 The axial velocity of pure nitrogen is much higher than that of pure argon and 50%Ar + 50%N2, while that of pure argon and 50%Ar + 50%N2 has little difference. In addition, when nitrogen gas was used, the peak velocity at the outlet reached 185 m/s, whereas, for argon gas and 50%Ar + 50%N2, the corresponding peak velocities were 146 m/s and 169 m/s, respectively. 3 The simulated arc voltage trends under different working conditions are well in accordance with the experimental arc voltage trends.

Application of similarity theory to predict operational characteristics of a DC plasma torch under low-pressure condition

Current–voltage Characteristics of Hydrogen DC Plasma Torches with Different Sizes in an External Axial Magnetic Field

Numerical Simulation of the Flow Characteristics Inside a Novel Plasma Spray Torch

Numerical Simulation of Plasma Jet Characteristics under Very Low-Pressure Plasma Spray Conditions

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Characterization of DC argon plasma jet at atmospheric pressure

Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

Characterization of a steam plasma jet at atmospheric pressure

Dynamic behaviour of dc double anode plasma torch at atmospheric pressure

Influence of secondary gas on control characteristics of ICP-RF plasma torches

Characterization of atmospheric pressure plasma plume

Design and Construction of a Low-Flow, Low-Power Torch for Inductively Coupled Plasma Spectrometry

Arc Fluctuations in a Double Anode Plasma Torch at Atmospheric Pressure

Modeling of the Arc Characteristics inside a Thermal Laminar Plasma Torch with Different Gas Components

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Main Issues for a Fully Predictive Plasma Spray Torch Model and Numerical Considerations

Study of the Characteristic of Dc Arc Plasma Torch

Theoretical Aspects and Design of a Low-Power, Low-Flow-Rate Torch in Inductively Coupled Plasma Atomic Emission Spectroscopy

Experimental study on the life and performance of an improved DC arc plasma torch

Characterization of an Atmospheric Pressure DC Microplasma Jet

Application of Steenbeck's minimum principle for three-dimensional modelling of DC arc plasma torches