Abstract:Background The article delineates a strategy for detecting ascorbic acid (AA) through the use of iron oxide (Fe₂O₃) nanoparticles on an electrode. The Fe₂O₃ nanoparticles demonstrated effective electrocatalysis in the oxidation of AA, resulting in increased peak currents. The sensor showcased a wide linear detection range, a low detection limit, and high selectivity towards interferents, making it suitable for accurate AA measurement in food analysis and medical diagnostics applications. This emphasizes the potential of Fe₂O₃ nanoparticle-based sensors for precise AA detection. Aim The primary aim of this research is to develop an electrochemical sensing technique for the identification of ascorbic acid, with the use of Fe₂O₃ nanoparticles as the sensing matrix. Materials and methods The synthesis process involved the utilization of FeCl3.6H2O, ammonia solution, ethanol, and double-distilled water. FeCl3.6H2O was dissolved in ammonia water to produce a brown precipitate for the synthesis of Fe₂O₃ nanoparticles. Subsequently, the brown precipitate underwent hydrothermal treatment at 180 °C, resulting in the formation of a red product. Following centrifugation, washing, and drying steps, Fe₂O₃ nanoparticles were successfully synthesized. These nanoparticles were then utilized to modify the glassy carbon electrode (GCE). Prior to the modification, the GCE underwent polishing and cleaning procedures, after which it was coated with a suspension containing 5 mg of Fe₂O₃ nanoparticles in 10 mL of ethanol. The coated electrode was dried and deemed ready for application in electrochemical sensing. Results The hydrothermal method was employed in this research to synthesize Fe₂O₃ nanoparticles, which were subsequently subjected to a series of experiments to evaluate their electrochemical sensing capabilities. The resulting Fe₂O₃ nanoparticles were determined to possess a high level of purity and a crystalline structure through various analyses, including field emission-scanning electron microscopy (FE-SEM), cyclic voltammetric testing, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy analysis, differential pulse voltammetry (DPV), and the current response of the Fe₂O₃-modified electrode towards ascorbic acid. The morphology of the Fe₂O₃ nanoparticles was observed to be uniform. The synthesized particles successfully fulfilled the study's objective by exhibiting remarkably sensitive and selective sensitivity towards ascorbic acid. Conclusion Our study underscores the potential of utilizing Fe₂O₃ nanoparticle-based electrochemical sensing to detect ascorbic acid, as evidenced by the notably high sensitivity of ascorbic acid towards Fe₂O₃ nanoparticles. The distinctive properties of Fe₂O₃ nanoparticles, which include their large surface area, efficient electron transport, and straightforward manufacturing process, significantly enhance the sensor's performance. Further research is crucial to exploring the wide-ranging applications of the sensor in fields such as food safety, environmental monitoring, and biological diagnostics and to overcome any existing limitations.

Low Overpotential Amperometric Sensor Using Yb2O3.CuO@rGO Nanocomposite for Sensitive Detection of Ascorbic Acid in Real Samples

A Novel Electrochemical Aptasensor Based on Polyaniline and Gold Nanoparticles for Ultrasensitive and Selective Detection of Ascorbic Acid.

An effective sensing platform composed of polyindole based ternary nanocomposites for electrochemical detection of ascorbic acid

Novel and Extremely Sensitive NiAl2O4-NiO Nanostructures on an ITO Sensing Electrode for Enhanced Detection of Ascorbic Acid

A novel Au-NPs/DBTTA nanocomposite-based electrochemical sensor for the detection of ascorbic acid (AA)

Ascorbic Acid Detection Using Gold Nanoparticles and Graphene Oxide–Coated SMS Optical Fiber–Based Sensor

Electrochemical sensor based on carbon-supported NiCoO2 nanoparticles for selective detection of ascorbic acid

Simultaneous Detection of Ascorbic Acid, Dopamine, and Uric Acid Using a Novel Electrochemical Sensor Based on Palladium Nanoparticles/Reduced Graphene Oxide Nanocomposite

Electrochemical Detection of Ascorbic Acid by Fe₂O₃ Nanoparticles Modified Glassy Carbon Electrode

A Novel Sensor Based on Electrodeposited Au–Pt Bimetallic Nano-Clusters Decorated on Graphene Oxide (go)–electrochemically Reduced GO for Sensitive Detection of Dopamine and Uric Acid

Novel Ni-MoO3/rGO-Modified Electrodes for Selective, Sensitive Detection of Vitamin-C and Its Supercapacitor Application

Amperometric Sensor for Ascorbic Acid Based on a Glassy Carbon Electrode Modified with Gold-Silver Bimetallic Nanotubes in a Chitosan Matrix

Highly Heterogeneous Morphology of Cobalt Oxide Nanostructures for the Development of Sensitive and Selective Ascorbic Acid Non-Enzymatic Sensor

A novel electrochemical biosensor for the determination of dopamine and ascorbic acid based on graphene oxide /poly(aniline-co-thionine) nanocomposite

High-performance photoelectrochemical sensor based on CdS-Au composite nanomaterials and localized surface plasmon resonance for ultrasensitive detection of ascorbic acid

A Novel Electrochemical Sensor Based on Pd Confined Mesoporous Carbon Hollow Nanospheres for the Sensitive Detection of Ascorbic Acid, Dopamine, and Uric Acid

Highly Sensitive Electrochemical Sensor Based on a Solvent-Processing Cobalt Phthalocyanine for Detection of Ascorbic Acid

A portable ascorbic acid in sweat analysis system based on highly crystalline conductive nickel-based metal-organic framework (Ni-MOF)

From waste to wealth: iron oxide doped hydroxyapatite-based biosensor for the colorimetric detection of ascorbic acid

A MnO2 nanosheet-based ratiometric fluorescent nanosensor with single excitation for rapid and specific detection of ascorbic acid

Ratiometric Electrochemical Sensor for Effective and Reliable Detection of Ascorbic Acid in Living Brains