Abstract:The cost-efficient and plentiful Na and K resources motivate the research on ideal electrodes for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). Here, MoSe2 nanosheets perpendicularly anchored on reduced graphene oxide (rGO) are studied as an electrode for SIBs and PIBs. Not only does the graphene network serves as a nucleation substrate for suppressing the agglomeration of MoSe2 nanosheets to eliminate the electrode fracture but also facilitates the electrochemical kinetics process and provides a buffer zone to tolerate the large strain. An expanded interplanar spacing of 7.9 Å is conducive to fast alkaline ion diffusion, and the formed chemical bondings (C–Mo and C–O–Mo) promote the structure integrity and the charge transfer kinetics. Consequently, MoSe2@5%rGO exhibits a reversible specific capacity of 458.3 mAh·g–1 at 100 mA·g–1, great cyclability with a retention of 383.6 mAh·g–1 over 50 cycles, and excellent rate capability (251.3 mAh·g–1 at 5 A·g–1) for SIBs. For PIBs, a high first specific capacity of 365.5 mAh·g–1 at 100 mA·g–1 with a low capacity fading of 51.5 mAh·g–1 upon 50 cycles and satisfactory rate property are acquired for MoSe2@10%rGO composite. Ex situ measurements validate that the discharge products are Na2Se for SIBs and K5Se3 for PIBs, and robust chemical bonds boost the structure stability for Na- and K-ion storage. The full batteries are successfully fabricated to verify the practical feasibility of MoSe2@5%rGO composite.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22430?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22430</a>.Additional SEM images, TEM image, HRTEM image, EDS mapping images, SAED pattern, XRD patterns, Raman spectra, N2 adsorption–desorption isotherms, mesoporous size distribution curves, XPS survey spectra, CV profiles and charge/discharge curves for SIBs, comparison of the rate properties of the previously reported MoSe2-based materials for SIBs with our work, charge/discharge profiles at different current densities for SIBs, CV profiles and charge/discharge curves for PIBs, CV curves at various scanning rates for PIBs, EIS results, TEM images at different states for SIBs and PIBs, SAED patterns, HRTEM images and XPS spectra at the first fully discharged and charged states for PIBs, and illustration diagram of full batteries, as well as charge/discharge curves and cycling stability of Na2Ni[Fe(CN)6] and K2Ni[Fe(CN)6] cathodes in half cell systems (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22430/suppl_file/am0c22430_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Confining MoSe 2 Nanosheets into N-Doped Hollow Porous Carbon Microspheres for Fast-Charged and Long-Life Potassium-Ion Storage

Rational design of MoSe2 nanosheet-coated MOF-derived N-doped porous carbon polyhedron for potassium storage

Hierarchical construction of MoSe 2 nanoparticles anchored on N-doped porous carbon nanocages with Mo-C bonding for enhanced potassium-ion storage

Ultra-small few-layered MoSe 2 nanosheets encapsulated in nitrogen-doped porous carbon nanofibers to create large heterointerfaces for enhanced potassium-ion storage

N, P Codoped Hollow Carbon Nanospheres Decorated with MoSe2 Ultrathin Nanosheets for Efficient Potassium-Ion Storage.

Carbon Coated MoS2 Hierarchical Microspheres Enabling Fast and Durable Potassium Ion Storage

Flower-like CoSe 2 /N, P-doped carbon microspheres accommodated on carbon nanosheets for high-performance potassium-ion batteries

Enhancing potassium-ion battery performance by MoS2 coated nitrogen-doped hollow carbon matrix

Binding Se into Nitrogen‐doped Porous Carbon Nanosheets for High‐performance Potassium Storage

Two-dimentional MoSe2/chitosan-derived nitrogen-doped carbon composite enabling stable sodium/potassium storage

A dual-carbon structured molybdenum selenide composites controlled via interface engineering and chemical bonding to attain high initial coulombic efficiency and rate capability of potassium-ion batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Antimony anchored in MoS 2 nanosheets with N-doped carbon coating to boost potassium storage performance

N-doped Carbon/ultrathin 2D Metallic Cobalt Selenide Core/sheath Flexible Framework Bridged by Chemical Bonds for High-Performance Potassium Storage

Heterogeneous MoSe 2 /Nitrogen‐Doped‐Carbon Nanoarrays: Engineering Atomic Interface for Potassium‐Ion Storage

Pistachio-Shuck-Like MoSe 2 /C Core/Shell Nanostructures for High-Performance Potassium-Ion Storage.

Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere

Expanded MoSe 2 Nanosheets Vertically Bonded on Reduced Graphene Oxide for Sodium and Potassium-Ion Storage

Facile fabrication of few-layer nanostructured MoSe 2 entrenched on N-doped carbon as a superior anode material for high-performance potassium-ion hybrid capacitors

Bimetal heterostructure NiCo 2 Se 4 anode confined by carbon nano boxes for ultrafast and stable potassium storage

CoSe 2 /N-doped carbon porous nanoframe as an anode material for potassium-ion storage