Abstract:Due to the steadily increasing growth of renewable energies, the importance of stationary energy storage systems is growing significantly. A potentially very cheap alternative to lithium-ion and vanadium redox flow batteries are iron/iron redox flow batteries. Iron is an extremely inexpensive active material, thus enabling cheap energy storage solutions and perhaps batteries with very low investment costs while maintaining low toxicity and aggressiveness due to the moderate pH and relatively low potential of the positive electrode. An iron(II) salt solution serves as the initial solution and is oxidized to iron(III) at the positive electrode and reduced to elemental iron at the negative electrode during the charging process. One of the biggest problems is the formation of hydrogen at the iron electrode during the charging process at low pH values and the precipitation of iron(II) hydroxides from slightly acidic pH values [[i]]. When operating this type of battery, the negative electrode must be kept within a narrow pH window where no precipitation occurs and as little hydrogen as possible is evolved, which in turn significantly reduces battery life and efficiency. As part of a feasibility, different iron/iron redox flow batteries were constructed and their electrochemical properties were investigated. One of the most important components of the battery was the recombination cell, which allows hydrogen evolution to be reversed, thus significantly increasing the number of cycles. Different substrates for iron deposition were investigated, different membranes as well as different charging and discharging parameters of the battery. With the recombination cell, it was possible to complete up to one hundred cycles with long cycle times of 1 h charging time, and to calculate and compare efficiencies and other performance values. A kynol fabric achieved the best performance and all membranes investigated showed potential applications. An optimized battery achieved up to 70% energy efficiency at 12.5 mA/cm2 and max. 47 mW/cm2 power density at 75 mA/cm2. [i] [1]L. W. Hruska, J. Electrochem. Soc. 1981, 128, 18. Figure 1

Multi-Week Cycling of a Nonaqueous Flow Battery Using Tris-Bipyridine Iron (II) Triflate without Additional Supporting Electrolyte

Phosphonate-based iron complex for a cost-effective and long cycling aqueous iron redox flow battery

Concentration-dependent Cycling of Phenothiazine-based Electrolytes in Nonaqueous Redox Flow Cells

Triphasic Electrolytes for Membrane-Free High-Voltage Redox Flow Battery

Symmetry-breaking design of an organic iron complex catholyte for a long cyclability aqueous organic redox flow battery

Developing Terpyridine-Based Metal Complexes for Non-Aqueous Redox Flow Batteries

Highly Soluble and Crossover-Free All-Organic Redox Pair Using N-Heterocycle-Linked Tempo and Two-Electron-Capable Bipyridinium Towards High Performance Aqueous Flow Batteries

Ferrocene/naphthalimide bi-redox molecule for enhancing the cycling stability of symmetric nonaqueous redox flow battery

An aqueous organic redox flow battery employing a trifunctional electroactive compound as anolyte, catholyte and supporting electrolyte

A pH‐Neutral, Aqueous Redox Flow Battery with a 3600‐Cycle Lifetime: Micellization‐Enabled High Stability and Crossover Suppression

An Automatized Rebalancing System to Address Faradaic Imbalance and Prolong Cycle Life in Alkaline Ferrocyanide – Anthraquinone Redox Flow Batteries

Revisiting the cycling stability of ferrocyanide in alkaline media for redox flow batteries

A Novel Tripyridinium-Triazine Molecule: Radicals Stabilization Enabling Reversible Multi-Electron Storage

Arylene Diimide Derivatives As Anolyte Materials with Two-Electron Storage for Ultrastable Neutral Aqueous Organic Redox Flow Batteries

Tetrathiafulvalene (TTF) derivatives as catholytes for dual-type redox flow batteries: molecular engineering enables high energy density and cyclability

The Dual Role of Bridging Phenylene in an Extended Bipyridine System for High-Voltage and Stable Two-Electron Storage in Redox Flow Batteries

Iron Complex Posolyte Species Possessing Low Capacity Fade Rate Combined with Large Positive Redox Potential for Aqueous Organic Flow Batteries

(Invited) Iron/Iron Redox Flow Battery Optimisation Studies

Sulfonated-Ligand Engineering Enables a Stable Alkaline All-Iron Ion Redox Flow Battery

Assembling-induced redox property adjustment of Fe(III)/Fe(IV) electroredox couple-based commercial dye catholyte via bio-inspired multicoordination sphere construction strategy for stable aqueous redox flow batteries

A Double‐ligand Chelating Strategy to Iron Complex Anolytes with Ultrahigh Cyclability for Aqueous Iron Flow Batteries