Abstract:Ferrograph-based wear debris analysis (WDA) provides significant information for wear fault analysis of mechanical equipment. After decades of offline application, this conventional technology is being driven by the online ferrograph sensor for real-time wear state monitoring. However, online ferrography has been greatly limited by the low imaging quality and segmentation accuracy of particle chains when analyzing degraded lubricant oils in practical applications. To address this issue, an integrated optimization method is developed that focuses on two aspects: the structural re-design of the online ferrograph sensor and the intelligent segmentation of particle chains. For enhancing the imaging quality of wear particles, the magnetic pole of the online ferrograph sensor is optimized to enable the imaging system directly observe wear particles without penetrating oils. Furthermore, a light source simulation model is established based on the light intensity distribution theory, and the LED installation parameters are determined for particle illumination uniformity in the online ferrograph sensor. On this basis, a Mask-RCNN-based segmentation model of particle chains is constructed by specifically establishing the region of interest (ROI) generation layer and the ROI align layer for the irregular particle morphology. With these measures, a new online ferrograph sensor is designed to enhance the image acquisition and information extraction of wear particles. For verification, the developed sensor is tested to collect particle images from different degraded oils, and the images are further handled with the Mask-RCNN-based model for particle feature extraction. Experimental results reveal that the optimized online ferrography can capture clear particle images even in highly-degraded lubricant oils, and the illumination uniformity reaches 90% in its imaging field. Most importantly, the statistical accuracy of wear particles has been improved from 67.2% to 94.1%.

Use of mask R-CNN for detection and control of slag scraper wear

Steel Surface Defect Detection Based on Improved MASK RCNN

Continuous casting slag carry-over detection system based on vibration signal measurement

Ladle pouring process parameter and quality estimation using Mask R-CNN and contrast-limited adaptive histogram equalisation

Mask R-CNN-Based Welding Image Object Detection and Dynamic Modelling for WAAM

A data-driven approach to RUL prediction of tools

Online Tool Wear Classification during Dry Machining Using Real Time Cutting Force Measurements and a CNN Approach

Research on Recognition of Working Area and Road Garbage for Road Sweeper Based on Mask R-CNN Neural Network

Towards Robust Ferrous Scrap Material Classification with Deep Learning and Conformal Prediction

Optimized Mask-RCNN Model for Particle Chain Segmentation Based on Improved Online Ferrograph Sensor

Real-time monitoring of molten zinc splatter using machine learning-based computer vision

Recognition of Converter Steelmaking State Based on Convolutional Recurrent Neural Networks

Real-time monitoring of activated sludge flocs via enhanced mask region-based Convolutional Neural networks

Tool wear monitoring using a novel parallel BiLSTM model with multi-domain features for robotic milling Al7050-T7451 workpiece

Embedded Continuous Casting Slag Detection System Based on Artificial Neural Network

Enhanced Faster Region Convolutional Neural Networks for Steel Surface Defect Detection

Manipulation of a Complex Object Using Dual-Arm Robot with Mask R-CNN and Grasping Strategy

Intelligent Video Recognition of Violation Behavior in Substation Site Based on Mask R-CNN

Detection and Segmentation of Manufacturing Defects with Convolutional Neural Networks and Transfer Learning

High-Precision Surface Crack Detection for Rolling Steel Production Equipment in ICPS

Hyper CLS-Data-Based Robotic Interface and Its Application to Intelligent Peg-in-Hole Task Robot Incorporating a CNN Model for Defect Detection