Abstract:At present, the reliability analysis and design method of vertically loaded piles embedded in spatially variable soils is difficult to be applied in practical engineering due to the huge computation effort required. To improve computational efficiency, this paper proposes a new method called the FORM–KL–LTM, which integrates the advantages of the first-order reliability method (FORM), the Karhunen–Loève (KL) expansion method, and the load transfer method (LTM). The main framework of the FORM–KL–LTM is the FORM, which is used to perform reliability analysis for the pile. The KL expansion method is adopted to carry out random discretization to generate the discrete soil parameters required by each iterative computation of the reliability index using the FORM, and the LTM is employed to evaluate the nonlinear load–settlement behavior of the pile head and to compute the values of limit state functions required by the FORM. The proposed method is computationally efficient because the number of random variables is controlled by the limit number of KL expansion terms. Based on the FORM–KL–LTM, a reliability sensitivity analysis method is proposed, which can compute the sensitivity index for measuring the relative sensitivity of the reliability index with respect to soil properties. Furthermore, a procedure for the reliability-based design (RBD) of piles embedded in spatially variable soils is established for the design of pile geometry, and a design ratio is defined to select the controlling limit state in the RBD of pile for both the ultimate limit state and the serviceable limit state. The procedure, accuracy, and efficiency of the proposed methods are demonstrated by providing an example of the reliability analysis and design of a vertically load pile in spatially variable soils.

Reliability-Based Load and Resistance Factors for Soil Nail Walls Against Facing Failures

System Reliability Analysis of Soil Nail Walls against Facing Failures

An Optimization Method of Reliability Analysis of Foundation Pit Reinforced with Soil Nailing

An Efficient Probabilistic Design Approach for Tunnel Face Stability by Inverse Reliability Analysis

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Statistical calibration of federal highway administration simplified models for facing tensile forces of soil nail walls

Development of models for facing tensile forces of soil nail walls using statistical approaches

Model Uncertainty in Predicting Facing Tensile Forces of Soil Nail Walls Using Bayesian Approach

Reliability Analysis of Ground–support Interaction in Circular Tunnels Using the Response Surface Method

Simplified Approach for Reliability-Based Design Against Basal-Heave Failure in Braced Excavations Considering Spatial Effect

LRFD Approach to CFRP Renewal of Prestressed Concrete Cylinder Pipes

Reliability Based Design Optimization for a Rock Tunnel Support System with Multiple Failure Modes Using Response Surface Method

Reliability study on shield tunnel face using a random limit analysis method in multilayered soils

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Optimization of geometric parameters of soil nailing using response surface methodology

Theoretical Method for Predicting the Failure Mode of Reinforced Concrete Shear Walls Subjected to Axial Tension and Cyclic Lateral Loads

Assessment of Resistance Factors for LRFD of Steel Bolted Connections in Pultruded FRP Frames

Finite Element Calculation for Safety Factor of Soil Nailing Through Reduction of Strength Parameters

Study of Stress-Strain Behaviour in Soil Nail Wall Using Flexible Facing

Reliability Analysis and Design of Vertically Loaded Piles in Spatially Variable Soils