Abstract:Miscible density-driven convection in porous media has important implications to the long-term security of geological carbon sequestration. Laboratory investigations of miscible density-driven convection in heterogeneous porous media have been greatly limited due to the challenge in constructing well-controlled heterogeneous permeability fields. In this study, three-dimensional (3D) printing was used to solve the challenge. Particularly, elementary sediment blocks were 3D printed to construct heterogeneous permeability fields having the desired mean, standard deviation, and spatial correlation length of permeability. A methanol-ethylene-glycol (MEG) solution was placed at the top of the permeability field to trigger miscible density-driven downward convection. Results showed that permeability heterogeneity caused noticeable uncertainty in the total MEG mass transferred into the permeability field, and the uncertainty increased with increasing correlation length of the permeability field. In a heterogeneous permeability field with a larger spatial correlation length, a larger effective vertical permeability is in general favorable for solute mass transfer into the underlying porous medium. Conversely, in a heterogeneous permeability field with a shorter spatial correlation length, a larger effective vertical permeability does not necessarily lead to a higher mass transfer rate. This is because mass transfer across the top boundary through miscible density-driven convection depends on the flow recirculation near the interface. A large effective vertical permeability does not necessarily lead to fast flow recirculation because the former is measured in the vertical direction whereas the latter depends more on the internally-connected, high-permeability streaks within the domain. The 3D-printed elementary sediment blocks can be re-distributed to construct another permeability field easily, which greatly reduces the experimental time and thus significantly increases the total number of experiments that can be conducted, thereby approaching the ergodicity requirement when a large number of random permeability fields is needed.

Homogenizing fluid transport in stratified porous media using an elastic flow instability

Harnessing elastic instabilities for enhanced mixing and reaction kinetics in porous media

Stagnation points at grain contacts generate an elastic flow instability in 3D porous media

Dynamics of Fluid Displacement in Mixed-Wet Porous Media

Bistability in the Unstable Flow of Polymer Solutions Through Porous Media

Self-organized homogenization of flow networks

Pore-Scale Flow Characterization of Polymer Solutions in Microfluidic Porous Media

Preferential Flow Control in Heterogeneous Porous Media by Concentration-Manipulated Rheology of Microgel Particle Suspension

From mixing to displacement of miscible phases in porous media: The role of heterogeneity and inlet pressure

Tuning capillary flow in porous media with hierarchical structures

Influence of fluid rheology on multistability in the unstable flow of polymer solutions through pore constriction arrays

Numerical simulation of miscible multiphase flow and fluid–fluid interaction in deformable porous media

A Homogenization Approach for Turbulent Channel Flows over Porous Substrates: Formulation and Implementation of Effective Boundary Conditions

Using 3D-printed fluidics to study the role of permeability heterogeneity on miscible density-driven convection in porous media

Effect of Elasticity and Nonlinear Viscosity on Fingering Instability in Heterogeneous Porous Media

Self-adaptive Preferential Flow Control Using Displacing Fluid with Dispersed Polymers in Heterogeneous Porous Media

Heterogeneously Engineered Porous Media for Directional and Asymmetric Liquid Transport

Modeling flow in porous media with double porosity/permeability: A stabilized mixed formulation, error analysis, and numerical solutions

Fluid-fluid displacement in mixed-wet porous media

Suppressing viscous fingering in structured porous media

Quasi-Linear Homogenization for Large-Inertia Laminar Transport across Permeable Membranes