Abstract:We present a kilogram-scale experiment for assessing the prospects of a novel composite material of metal–organic framework (MOF) and polyacrylates (PA), namely , for trace CO2 capture. Through the interfacial enrichment of metal ions and organic ligands as well as heterogeneous crystallization, the sizes of microporous NbOFFIVE-1-Ni crystals are downsized to 200–400 nm and uniformly anchored on the macroporous surface of PA via interfacial coordination, forming a unique dual-framework structure. Specifically, the composite with a loading of 45.8 wt % NbOFFIVE-1-Ni yields a superior CO2 uptake (ca. 1.44 mol·kg–1) compared to the pristine NbOFFIVE-1-Ni (ca. 1.30 mol·kg–1) at 400 ppm and 298 K, indicating that the adsorption efficiency of NbOFFIVE-1-Ni has been raised by 2.42 times. Meanwhile, the time cost for realizing a complete adsorption/desorption cycle in a fluidized bed has been shortened to 25 min, and the working capacity (ca. 0.84 mol·kg–1) declines only by 1.3% after 2000 cycles. The device is capable of harvesting 2.1 kg of CO2 per kilogram of composite daily from simulated air with 50% relatively humidity (RH). To the best of our knowledge, the excellent adsorption/desorption performances of position it as the most advantageous and practically applicable candidate for trace CO2 capture.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03661?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03661</a>.X-ray diffraction (XRD) patterns, FT-IR spectra, N2 adsorption/desorption isotherms, pore size distributions, a table of textural properties, TGA plots of the samples, the CO2 adsorption isotherm XPS spectra, a table of CO2 adsorption heat, images of water drops on the samples, the column breakthrough tests results, the kinetic performance without heat transfer limitation, a table of the kinetics, the dynamic fluidization state of the samples during the fluidized bed test, and the working principle diagram of the fluidized bed (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03661/suppl_file/am1c03661_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Encapsulation of Nanoparticle Organic Hybrid Materials within Electrospun Hydrophobic Polymer/Ceramic Fibers for Enhanced CO2 Capture

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Carbon capture in polymer-based electrolytes

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Fabrication of Polyacrylonitrile Nanofiber Membranes Functionalized With Metal Organic Framework for CO2 Capturing

Nanoarchitectured composite of polysulfone and carbon-based fillers bearing magnetically stimulable function for efficient CO2 capture

Effects of bonding types and functional groups on CO2 capture using novel multiphase systems of liquid-like nanoparticle organic hybrid materials

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Nanosilica polyamidoamine dendrimers for enhanced direct air CO2 capture

Poly(ionic liquid)-Derived Carbon with Site-Specific N-Doping and Biphasic Heterojunction for Enhanced CO2 Capture and Sensing

A Highly Efficient and Stable Composite of Polyacrylate and Metal–Organic Framework Prepared by Interface Engineering for Direct Air Capture

Interfacial Control of Polyhipe with Nano-Tio2 Particles and Polyethylenimine Toward Actual Application in CO2 Capture

Synergy tetraethylenepentamine and diethanolamine impregnated within silica nanotubes derived from natural halloysite for efficient CO 2 capture

High Surface Area Nanoporous Carbon‐Ceria Composites for CO2 Capture and Enzyme‐Mimicking Action

Polyethyleneimine-Nano Silica Composites: A Low-Cost And Promising Adsorbent For Co2 Capture

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Alumina Incorporation in Self-Supported Poly(ethylenimine) Sorbents for Direct Air Capture

Microencapsulation of advanced solvents for carbon capture

Rational Design of Carbon-Based Porous Aerogels with Nitrogen Defects and Dedicated Interfacial Structures toward Highly Efficient CO 2 Greenhouse Gas Capture and Separation

Amine-impregnated natural inorganic nanotubes via layer-by-layer electrostatically self-assembly approach for efficient CO 2 adsorption