Abstract:The paper describes physical and numerical simulations of a manufacturing process composed of hot forging and controlled cooling, which replace the conventional heat treatment technology. The objective was to investigate possibilities and limitations of the heat treatment with the use of the heat of forging. Three steels used to manufacture automotive parts were investigated. Experiments were composed of two sets of tests. The first were isothermal (TTT) and constant cooling rate (CCT) dilatometric tests, which supplied data for the identification of the numerical phase transformation model. The second was a physical simulation of the sequence forging-cooling on Gleeble 3800, which supplied data for the validation of the models. In the numerical part, a finite element (FE) thermal-mechanical code was combined with metallurgical models describing recrystallization and grain growth during forging and phase transformations during cooling. The FE model predicted distributions of the temperature and the austenite grain size in the forging, which were input data for further simulations of phase transformations during cooling. A modified JMAK equation was used to calculate the kinetics of transformation and volume fraction of microstructural constituents after cooling. Since the dilatometric tests were performed for various austenitization temperatures before cooling, it was possible to include austenite grain size as a variable in the model. An inverse algorithm developed by the authors was applied in the identification procedure. The model with optimal material parameters was used for simulations of hot forging and controlled cooling in one of the forging shops in Poland. Distributions of microstructural constituents in the forging after cooling were calculated. As a consequence, various cooling sequences during heat treatment could be analyzed and compared.

Determination of Thermal Properties of Foundry Green Sand to Improve Numerical Simulation

An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process

Numerical Simulation of Compacting Process of Green Sand Molding Based on Sand Filling

Progress of Research on Numerical Simulation of Green Sand Molding Process

Determination and Application of Thermophysical Properties of Heavy Steel Casting for Solidification Simulation

Numerical research of gas-related defects for gray cast iron during sand casting

Numerical simulation and experimental verification of the initial temperature distribution of castings during mold filling process

Investigations on Physical and Chemical Properties of High Silica Sand, Fe-Cr Slag and Blast Furnace Slag for Foundry Applications

Heat Transfer Coefficient Determination in a Gravity Die Casting Process with Local Air Gap Formation and Contact Pressure Using Experimental Evaluation and Numerical Simulation

Numerical simulation of the green sand compacting process taking into account the density distribution after sand filling

Numerical Simulation of Thermal Conductivity and Thermal Stress in Lightweight Refractory Concrete with Cenospheres

Numerical Simulation of Thermal Conductivity of Stainless Steel and Al-12Si Powders for Additive Manufacturing

Thermal Property Database for Investment Casting Shells

Investigations of the Cold Box Core Curing Stage Using an Augmented Simulation Approach

Determining Thermal Properties of Insulating Sleeves

An Inverse Estimation of Frozen Sand Mold-Melt Heat Transfer Coefficient in the Solidification of A356 Alloy

Progress in numerical simulation of solidification process of shaped casting

Shrinkage Behaviour of Spheroidal Graphite Cast Iron in Green and Dry Sand Molds for the Benchmarking of Solidification Simulation

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Modelling of Structure Formation and Relation to Mechanical Properties of Nodular Cast Iron

Progress in numerical simulation of casting process