Abstract:Dyes used in textiles, foods, cosmetics, and chemicals have become a major environmental pollution issue around the world. To address this issue, a number of technologies have been created to remove these pollutants from the environment. Due to their superior properties at nanoscale, numerous nanomaterials have been applied to remove dyes from polluted waters. This research presents the findings of the development of bentonite nano zero-valent iron (B-nZVI) for the treatment of synthetic cationic dyes. This study has three objectives: (i) to produce bentonite nano zero-valence iron (B-nZVI), (ii) to characterize its adsorbents (B-nZVI), (iii) to characterize its adsorption capacity. Four main tests were used for this purpose: (i) a physical test (Brunauer–Emmett–Teller (BET) surface area), (ii) a chemical test (cation exchange capacity (CEC) and X-ray fluorescence (XRF)), (iii) morphology (field emission scanning electron microscopy (FESEM) and (iv) mineralogy (Fourier transform infrared spectroscopy (FTIR). The five factors for the batch equilibrium test are adsorbent dose, concentration, kinetic, pH, and temperature. The batch test showed that the optimum dose for all adsorbents is 0.5 g. For the concentration factor, B-nZVI exhibits larger adsorption capacity (KL = 30,314.0536 L/g; R2 = 1) compared to bentonite (Kd = 0.0219 L/g; R2 = 0.8892). The kinetic factor showed that the adsorption capacity by pseudo-second-order model was the best for both adsorbents (qe = 1.2038 mg/g, R2 = 0.9993 for bentonite and qe = 6.9979 mg/g, R2 = 1 for B-nZVI). For B-nZVI, the interparticle diffusion model (Kf = 0.8645 m2 g−1 min L−1; R2 = 0.9) and intraparticle diffusion model (Kd = 2.3829 m2 g−1 min L−1; R2 = 0.9189) showed a good correlation with the adsorption data, while bentonite showed a lower correlation with the interparticle diffusion model (Kf = 0.0002 m2 g−1 min L−1; R2 = 0.6253) and intraparticle diffusion model (Kd = 0.2886 m2 g−1 min L−1; R2 = 0.6026), respectively. The pH factor showed that the adsorption capacity of bentonite (qe = 0.5674 mg/g) and B-nZVI (qe = 5.3284 mg/g) was highest in acidic conditions (pH 2). As for the temperature factor, there was no significant effect on bentonite and B-nZVI. Therefore, tests can be conducted at room temperature, saving energy. It was also concluded that B-nZVI is the best material for removing MB compared to bentonite and can be considered for the treatment materials of contaminated water.

Zero Valent Iron Impregnated Sodium Alginate Grafted (Acrylamide-Co-Acrylic Acid) Adsorbents for the Removal of Methylene Blue in Aqueous Systems

Preparation of nano zero-valent aluminum for one-step removal of methylene blue from aqueous solutions: cost analysis for scaling-up and artificial intelligence

Adsorption of Methylene Blue by Bentonite Supported Nano Zero Valent Iron (B-nZVI)

Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel

Synthesis, characterization, adsorption properties and mechanism of gravity-assisted zirconium alginate hydrogel fiber for removal of methylene blue from water

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Removal of Methylene Blue by Granitic Residual Soil Supported Nano Zero Valent Iron (Gr-nZVI): Kinetic and Equilibrium Studies

Absorption and adsorption studies of polyacrylamide/sodium alginate hydrogels

Regression analysis and artificial intelligence for removal of methylene blue from aqueous solutions using nanoscale zero-valent iron

Lignin/sodium alginate hydrogel for efficient removal of methylene blue

Optimization and Adsorption Behavior of Nanostructured NiFe2O4/Poly AMPS Grafted Biopolymer

Zero-valent iron supported-lemon derived biochar for ultra-fast adsorption of methylene blue

Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability

Synthesis of Nano‐zero‐valent Iron/Chitosan based on Bimetallic Nanoparticles for the Simultaneous Removal of Reactive Violet 5 and Reactive Blue 171 from Aquatic Media: Response Surface Methodology

Reduction of Biological Contaminants from Municipal Wastewater by Encapsulated nZVI in Alginate (Ag) Polymer: Reduction Mechanism with Artificial Intelligence Approach

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Electrolytic synthesis of γ-Al2O3 nanoparticle from aluminum scrap for enhanced methylene blue adsorption: experimental and RSM modeling

Adsorption technique using new semi-IPN hydrogels for high removal of methylene blue dye from aqueous solutions

Development of a novel bionanocomposite of UiO-66/xanthan gum/alginate crosslinked by calcium chloride for azo dye removal: Insight into adsorption kinetics, isotherms, and thermodynamics

Methylene Blue Adsorption by Activated Carbon, Nickel Alginate/activated Carbon Aerogel, and Nickel Alginate/graphene Oxide Aerogel: a Comparison Study

Development of oxidized sodium alginate/silica hybrid as efficient adsorbent for anionic and cationic dyes: mechanism and thermodynamic studies