Abstract:Suffering low frequency and small amplitude shaking, energy dissipation of long overhanding structures on the spacecraft under weightless environment is a key research topic for the safety of such spacecraft. The paper presented a novel magnetic fluid shock absorber to reduce the vibration of low frequency and small amplitude. The proposed shock absorber had the composite magnet structure including three magnets in the working element and it was attached with different inner surface materials. To the best of our knowledge, this was the first time to consider the relationship between inner surface materials and damping performance of the shock absorber. First, the damping performance of the shock absorber with various magnetic fluid volume percentage and gap size was investigated by reducing the free oscillations of the brass plate. Meanwhile, the magnetic restoring force between the working element and the repulsion magnet was measured. The experimental results showed that the magnetic restoring force versus the distance was almost linear, under small amplitude. When the distance was greater than 20mm, the approximate calculation formula of the equivalent stiffness could be obtained. We analyzed the influence of the different internal surface materials of the shock absorber on the damping performance by calculating the fluid resistance which was determined by both the viscous shear force and the capillary force. Experimental results verified that the capillary force had a significant influence on fluid resistance and couldn't be ignored. In terms of the vibration decay time, the damping efficiency of chemigum was 61.39% and 57.87% better than that of fluororubber for the gap of 2mm and 3mm respectively. According to the logarithmic decay rate, the damping efficiency of chemigum was 2.965 times that of fluororubber under the gap of 2mm and was 2.515 times under the gap of 3mm. For the reason that the shock absorber was used in aerospace, weight was an important factor. Our experiments proved that we must take into account both the densities of materials and the damping performance when selecting inner surface materials.

Performance tests and design of a series of magnetic fluid shock absorbers with varying stiffness based on optimal stiffness formula

Design of a stiffness adjustable magnetic fluid shock absorber based on optimal stiffness coefficient

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

The dynamics analysis of a magnetic fluid shock absorber with different inner surface materials

Optimization Design and Experimental Study of Magnetorheological Damper

Force Optimization and Damping Performance of a Novel Ferrofluid Inertial Damper Based on the Levitation Principle of Ferrofluids

Simulation and Optimization of Magnetic Negative Stiffness Dampers

Development of a Semi-Active Dynamic Vibration Absorber for Longitudinal Vibration of Propulsion Shaft System Based on Magnetorheological Elastomer

The Dynamics Analysis of A Ferrofluid Shock Absorber

Experimental Study on Magnetic Fluids Viscous Damper

Study on an Improved Variable Stiffness Tuned Mass Damper Based on Conical Magnetorheological Elastomer Isolators

A Novel Magnetic Fluid Shock Absorber with Levitating Magnets

A Design Methodology for A Magnetorheological Fluid Damper Based on A Multi-Stage Radial Flow Mode

A new magnetorheological elastomer torsional vibration absorber: structural design and performance test

Magnetic Negative Stiffness Dampers

Modeling and Analysis of the Magnetic Force and Stiffness of a Low-Frequency Vibration Isolator with Axial Magnetized Magnetic Rings.

Phase Based Stiffness Tuning Algorithm for A Magnetorheological Elastomer Dynamic Vibration Absorber

Research on Vibration Reduction Performance of Magnetic Rheological Fluid-Foam Metal Damper

Research on the Influence of Mechanical Characteristics of a Ferrofluid Inertial Damper on the Vibration-Damping Performance

Simulated and Experimental Studies on A High-Static-Low-Dynamic Stiffness Isolator Using Magnetic Negative Stiffness Spring