Abstract:The waste generated during ceramic polishing is typically disposed of in landfills rather than being recycled within the production facility, potentially causing environmental harm. This study aims to enhance industrial waste utilization and reduce CO 2 emissions in the cement industry by investigating the feasibility of incorporating ceramic sludge from polishing processes into an innovative binary blended cement. Different binders were prepared with varying amounts of ceramic polishing sludge (CPS), ranging from 10% to 50%, and tested against the ASTM C595 standards. The results were compared with those of ordinary Portland cement (OPC). This approach involves evaluating the pozzolanic activity and conducting an advanced characterization assessment of CPS and binary blended ceramic polishing sludge cement (CPSC) paste. This study employed a combination of physical, mechanical, and chemical tests, including setting time, particle size distribution (PSD), Brunauer-Emmett-Teller (BET) specific surface area, compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM), heat of hydration, and differential scanning calorimetry/thermogravimetric analysis (DSC/TGA). The results indicated that CPS can be used as a pozzolanic material to create innovative binders with properties comparable to those of OPC. The Strength Activity Index (SAI) values affirmed the pozzolanic properties of CPS, exceeding 75% for up to 40% CPS replacement. Incorporating CPS in the blended cement resulted in a slower rate of cement hydration, leading to prolonged setting times and reduced early strength development. Although the compressive strength decreased with increasing CPS content, it remained within the acceptable ASTM C595 limits with up to 50% replacement. Nevertheless, the optimal replacement level of OPC with CPS was determined to be 50%. Furthermore, CPS substitution reduced the dry density and improved the water absorption and apparent porosity, reflecting microstructural changes. The SEM images revealed that the blended CPSC had a lower apparent porosity than the pure OPC. The DSC/TGA analysis demonstrated that the blended cement had a lower calcium hydroxide content and higher silica than pure OPC.

Retaining the Particle packing approach and its application in developing the cement composites towards sustainability

Effects of Packing on Compressive Behaviour of Recycled Aggregate Concrete

A Proposed Mix Design of Concrete with Supplementary Cementitious Materials by Packing Density Method

Concrete Mix Design Using Particle Packing Method: Literature Review, Analysis, and Computation

The interplay among particle packing, binder, and strength: amelioration of ultra-high performance concrete with nanomaterials, a hope or hype?

A rational approach to develop gradation of sustainable multi recycled aggregate using particle packing methods

Recycling of Expired Cement and Aged Supplementary Cementitious Materials Based on Close Packing Theory and Space Filling Effect

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Improving Environmental Efficiency of Reverse Filling Cementitious Materials through Packing Optimization and Fiber Incorporation

Study on the Dense-Packing Effect and Properties of Multi-Component Cementitious Material

Design of self-compacting ultra-high performance concrete (SCUHPC) towards to the cementitious materials packing optimization

Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste

Study on Self Compacting Geopolynmer Concrete

A new gap-graded particle size distribution and resulting consequences on properties of blended cement

Effects of packing density and water film thickness on fresh and hardened properties of ternary cement pastes

Pozzolanic performance and characteristic analysis of binary blended cement incorporating ceramic polishing sludge

Sustainable Concrete: Exploring Fresh, Mechanical, Durability, and Microstructural Properties with Recycled Fine Aggregates

Synergy of Hydration and Microstructural Properties of Sustainable Cement Mortar Supplemented with Industrial By-Products

A Gap-Graded Particle Size Distribution for Blended Cements: Analytical Approach and Experimental Validation

Conjoint Reuse of Ceramic Polishing Waste and Calcium Carbide Slag As Mineral Admixtures: Hydration and Mechanical Properties

Early-Age Behaviour of Portland Cement Incorporating Ultrafine Recycled Powder: Insights into Hydration, Setting, and Chemical Shrinkage