Abstract:<p>Three-dimensional (3D) coil core is one kind of transformer iron core that is made of grain-oriented electrical steel. This material should be annealed before use because of the residual stress generated inside the silicon steel strip during production. The temperature evaluation of the 3D coil core is important to its annealing quality, but this temperature cannot be measured easily and the prediction method is seldom mentioned in the open literature. A numerical model, which considers the anisotropic heat conduction inside the 3D coil core and convection and radiation heat transfers inside the furnace, is built to link the temperature of furnace with the temperature of 3D coil core. Monte Carlo method is used to calculate the view factors between surfaces in the furnace. Thermal radiation resistance network method is used to obtain radiant heat flux. A computational fluid dynamics model is established to predict the convection heat transfer coefficient. The finite volume method is used to solve the anisotropic conduction inside the 3D coil core, wherein radiant heat flux and convection heat transfer coefficient serve as boundary conditions. The model considers the effects of size, position, location, orientation, and number of 3D coil cores on the temperature evolution. Onsite experiments verify that this digital model is precise in practical application, and the typical simulation error is less than ±2.5%. A straight forward optimization strategy is proposed on the basis of the digital model. The onsite experiments also show that the optimization method can effectively shorten the annealing time and increase the efficiency of the annealing process. Making a near real-time prediction and keeping 3D heat transfer features are the advantages of the present method.</p>

Tailoring Coil Geometry for Achieving Uniform Heating Through Coil Shape Optimization for Induction Heating-Based Metal Wire Additive Manufacturing

Tailoring coil geometry for achieving uniform heating through coil shape topology optimization for induction heating-based metal wire additive manufacturing

Tailoring coil geometry for secondary heating of substrate towards the development of induction heating-based wire additive manufacturing

Investigation of Dual Coil Induction Heating for Enhanced Temperature Distribution Optimization

A Study on the Method of Temperature Distribution Control in Electromagnetism Induction Heating

Homogeneous single-coil induction heating achieved by structure design

Analysis and Optimization of Induction Heating Processes by Focusing the Inner Magnetism of the Coil

Efficient Multiobjective Optimization Framework for Induction Heating Systems Design

Accurate Surface Normal Representation to Facilitate Gradient Coil Optimization on Curved Surface

Key Parameters and Optimal Design of a Split Induction Coil for T-Shaped Pipe Brazing

A New Target Field Method for Optimizing Longitudinal Gradient Coils' Property

Numerical model and optimization strategy for the annealing process of 3D coil cores

A comprehensive study of metal-coated short carbon fibers, graphite particles, and hybrid fillers for induction heating

Study of an additive manufacturing technology using pulsed inductive wire melting

Optimization of transverse induction coil structure and its influence on heat treatment of welded seam

Optimization of a Coil Design for Magnetic Hyperthermia Treatment Based on the Finite Element Method

Spatially tuned microstructure and properties in soft magnetic nanocrystalline alloy via transverse-oriented induction heating

Optimisation Research on Inductor Shape Parameters for Thermal Forming Behaviour of Ship Hull Plate by Moving Induction Heating

Optimized shape design and thermal characteristics investigation of helically coiled tube type heat exchanger

Optimizing transcranial magnetic stimulator coils for minimal influence of individual variability in head geometry