Abstract:A study aims to develop a machine that efficiently separates palm oil from the fruit's mesocarp and nut, increasing oil extraction. Stress and deformation analysis using finite element analysis was conducted to ensure machine performance. Results indicate the machine's design and materials support the separation process without cracking or deformation. This study addresses the inefficiencies in the current palm oil milling process, where the coexistence of mesocarp fiber and nut during pressing results in oil loss and nut breakage. To tackle this issue, the research aims to develop a machine that can separate mesocarp fibers from nuts before pressing, enhancing oil extraction and quality. The study involves designing the machine layout, creating schematic drawings, wireframe models, and assessing stress and deformation performance. Solidworks simulation was used to determine stress and deformation points within material properties, dimensions, and applied forces. The maximum stress on the rotating disc was 1.44 MPa, with a total deformation of 9.75 x 10−4 mm. Comparing this to the static component strength against cracking (0.093 MPa) revealed that the disc's material and design can safely with stand loads, preventing deformation during the mesocarp and nut separation process. This innovation promises to increase oil yields and improve oil quality in palm oil milling. Practical applications The separation of mesocarp fiber and nuts using centrifugal force is a feasible method. By removing nuts from the mesh (fiber) prior digestion and oil extraction process, the issue of nut breakage will be completely omitted, and thus the pressure can be further increased to maximize oil yield at the palm oil mill industries. This suggested approach has been demonstrated to produce a large amount of oil with minimal broken kernels. The crude palm oil obtained from this separation process also satisfies industrial standards.

Compact and Cost-Effective Oil Expeller

Prospects of Vegetable Oils as Lubricant in Crop Cutter and Harvesting Machines

Design And Development of Coconut Husk Extraction Machine

Design and development of secondary controlled industrial palm kernel nut vegetable oil expeller plant for energy saving and recuperation

Design and development of small-scale oil palm waste shredder for achieving technical, economic and environmental sustainability

Energy, environmental and economic evaluation of decentralized solar distillation and wood based distillation for extraction of organoleptically superior essential oils: A comparative analysis

Intensification of oil yield from Kokum seeds : An Energy-efficient Extraction using Ultrasonication Technique

Design and Fabrication of a Portable Low-Cost Rice Milling Machine with Automatic Feeding Mechanism

Design of a separator machine for oil palm fruit mesocarp and nut using computer‐aided design and linear finite element analysis

Coconut: Expanding avenues in processing and an exposition on non-conventional value-added products

Leading Edge Technologies and Perspectives in Industrial Oilseed Extraction

Design and Fabrication of Sunflower Seed Extracting Machine

Current trends in essential oil (EO) production

Domestic micro-screw oil press

Development of sustainable downstream processing for nutritional oil production

Household oil press

Enzyme-assisted Extraction Processing from Oilseeds: Principle, Processing and Application

Development of a Low-Cost Banana Fiber Extractor

Design and Fabrication of Organic Portable Shredder Machine

Extraction Methods of Oils and Phytochemicals from Seeds and Their Environmental and Economic Impacts

Policy Initiatives for enhancing domestic availability of vegetable oils in India