Abstract:The biosorption of heavy metals especially, Cd 2+ , Pb 2+ , and Zn 2+ from wastewater were evaluated using the biomass of macroalgae, Hypnea valentiae found in coastal waters of Rameshwaram, Tamil Nadu, India. The probable functional groups involved in the biosorption process was analyzed by Fourier transform infrared spectroscopy. The specific surface area, pore volume and pore diameter of prepared biosorbent was determined by Brunauer–Emmett–Teller (BET) analysis and it was found to be 59.993 m 2 g −1 , 0.292 cc g −1 and 1.429 nm, respectively. The scanning electron microscopy images after the biosorption revealed that the heavy metals have been adsorbed on to the surface of biosorbent. The optimization study was performed using Box–Behnken design and the optimum parameters used were initial concentration of metal ions (10–500 mg L −1 ), biomass dose (5–25 g L −1 ), contact time (10–120 min), temperature (25–45 °C), agitation speed (60–120 rpm) and pH (2–14). The heavy metal uptake (biosorption) was assessed by isotherm models including Dubinin–Radushkevich (D–R), Freundlich and Langmuir models. The maximum sorption of metal ions was observed in Langmuir isotherm model ( R L 0.1773 and K F 2.2030 L mg −1 ) with an R 2 value close to 0.99 clearly indicating the chemical mode of metal ion adsorption. Also, the sorption of Cd 2+ , Pb 2+ , and Zn 2+ on to the surface of algal biomass followed pseudo-second-order kinetics with a rate constant, k 2 being 9.627 × 10 −3 g (mg min) −1 and q e being 93.98496 mg g −1 , strongly supporting the chemisorption mechanism. The computed thermodynamic parameters (ΔG°, ΔH, and ΔS) demonstrated an endothermic, spontaneous biosorption that was feasible. The maximum removal efficiency was achieved for Pb (92.86%) followed by Cd (91.48%) and Zn (87.32%). The biosorbent can be reused and regenerated up to four cycles efficiently. There was a significant reduction in the biological oxygen demand, chemical oxygen demand, total dissolved solids, and pH of wastewater after treatment with the biosorbent. From this study, it is assessed that the biomass from red algae can be utilized for the biosorption of heavy metals from polluted water which is cost-effective and eco-friendly.

Alginate/Hyphaene thebaica Fruit Shell Biocomposite as Environmentally Friendly and Low-Cost Biosorbent for Heavy Metals Uptake from Aqueous Solution: Batch Equilibrium and Kinetic Studies

Synthesis of Eco-Friendly Biopolymer, Alginate-Chitosan Composite to Adsorb the Heavy Metals, Cd(II) and Pb(II) from Contaminated Effluents

A review on algal biosorbents for heavy metal remediation with different adsorption isotherm models

Adsorption of Pb(II) from Aqueous Solutions Using Nanocrystalline Cellulose/Sodium Alginate/K-Carrageenan Composite Hydrogel Beads

Alginate production of Pseudomonas strains and its application in preparation of alginate-biomass hydrogel for heavy metal adsorption

Efficient and sustainable approach of heavy metal adsorption from wastewater using algal biomass of Hypnea valentiae (Turner) Montagne, 1841

Ion-Induced Synthesis of Alginate Fibroid Hydrogel for Heavy Metal Ions Removal

Bioadsorbents from algae residues for heavy metal ions adsorption: chemical modification, adsorption behaviour and mechanism

A novel oyster shell biocomposite for the efficient adsorptive removal of cadmium and lead from aqueous solution: Synthesis, process optimization, modelling and mechanism studies

Removal of Mercury (II) and Lead (II) from Aqueous Media by Using a Green Adsorbent: Kinetics, Thermodynamic, and Mechanism Studies

Adsorption of Copper (II) from Aqueous Solutions with Alginate/Clay Hybrid Materials

On the performance of Sargassum-derived calcium alginate ion exchange resins for Pb2+ adsorption: batch and packed bed applications

Zinc oxide nanoparticles encapsulated in alginate beads: a promising and recyclable adsorbent for simultaneous uptake of toxic metals

Fabrication of Sodium Alginate Porous Scaffolds for Heavy Metal Ion Removal from Aqueous Solution

Kinetic and Equilibrium Studies on the Adsorption of Lead and Cadmium from Aqueous Solution Using Scenedesmus sp.

Preparation of Chitosan/Calcium Alginate/Bentonite Composite Hydrogel and Its Heavy Metal Ions Adsorption Properties

Biosorption of Cadmium, Lead and Chromium from Aqueous Solution Using Mountain Ebony Pod

Tosyl-carrageenan/alginate composite adsorbent for removal of Pb2+ ions from aqueous solutions

A biomass resource strategy for alginate-polyvinyl alcohol double network hydrogels and their adsorption to heavy metals

Efficient heavy metal removal from water by alginate-based porous nanocomposite hydrogels: The enhanced removal mechanism and influencing factor insight

Humic acid and nano-zeolite NaX as low cost and eco-friendly adsorbents for removal of Pb (II) and Cd (II) from water: characterization, kinetics, isotherms and thermodynamic studies