Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

Research progress on microstructure and property regulation of ultra-high temperature oxide eutectic ceramics by high gradient directional solidification technology

A review of Al2O3-based eutectic ceramics for high-temperature structural materials

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Research Progress on Ultra-high Temperature Ceramic Composites

Advances in ultra-high temperature ceramics, composites, and coatings

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Nanocrystalline Alumina-Zirconia-Based Eutectic Ceramics Fabricated with High-Energy Beams: Principle, Solidification Techniques, Microstructure and Mechanical Properties

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Enhanced 3D Printing and Crack Control in Melt-Grown Eutectic Ceramic Composites with High-Entropy Alloy Doping

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

Research Progress of Transition Metal Non-oxide High-entropy Ceramics

Research and Development of ZrB2-based Ultra-high Temperature Ceramics

High Temperature Deformation of Non-Directionally Solidified Al2O3/YAG/ZrO2 Eutectic Bulk Ceramic

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

Metal-carbide eutectics with multiprincipal elements make superrefractory alloys

Microstructure Evolution and Mechanical Behaviors of Alumina-Based Ceramic Shell for Directional Solidification of Turbine Blades

Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Study on Thermal Shock Resistance and Oxidation Resistance of Ultra-High Temperature Ceramics

Review on mechanics of ultra-high-temperature materials

Research Progress And Prospect Of High Nb Containing Tial Alloys Directional Solidification

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method