Abstract:All-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing to their exceptional room temperature ionic conductivity comparable even to those of their liquid electrolyte counterparts. Moreover, the good deformability of sulfide SEs renders them suitable for reducing the interfacial resistance between particles, thereby obviating the need for high-temperature sintering. Nevertheless, sulfide-based ASSB technology still remains at the research stage without any manufacturing schemes having been established. This state of affairs originates from the complex challenges presented by various aspects of these SEs: their weak stability in air, questions surrounding the exact combination of slurry solvent and polymeric binder for solution-based electrode fabrication, their high interfacial resistance resulting from solid particle contacts, and limited scalability with respect to electrode fabrication and cell assembly. In this Account, we review recent developments in which these issues were addressed by starting with the materials and moving on to processing, focusing on new trials. As for enhancing the air stability of sulfide SEs, strengthening the metal–sulfur bond based on the hard–soft acid–base (HSAB) theory has yielded the most notable results, although the resulting sacrificed energy density and weakened anode interface stability would need to be resolved. Novel electrode fabrication techniques that endeavor to overcome the critical issues originating from the use of sulfide SEs are subsequently introduced. The wet chemical coating process can take advantage of the know-how and facilities inherited from the more established lithium-ion batteries (LIBs). However, the dilemmatic matter of contention relating to the polarity mismatch among the slurry solvent, SE, and binder requires attention. Recent solutions to these problems involved the exploration of various emerging concepts, such as polarity switching during electrode fabrication, fine polarity tuning by accurate grafting, and infiltration of the electrode voids by a solution of the SE. The process of using a dry film with a fibrous binder has also raised interest, motivated by lowering the manufacturing cost, maintaining the environment, and boosting the volumetric energy density. Finally, optimization of the cell assembly and operation is reviewed. In particular, the application of external pressure to each unit cell has been universally adopted both in the fabrication step and during cell operation to realize high cell performance. The effect of pressurization is discussed by correlating it with the interface stability and robust interparticle contacts. Based on the significant progress that has been made thus far, we aim to encourage the battery community to engage their wide-ranging expertise toward advancing sulfide-based ASSBs that are practically feasible.This article has not yet been cited by other publications.

Realizing high-performance all-solid-state batteries with sulfide solid electrolyte and silicon anode: A review

Challenges and Developments of High Energy Density Anode Materials in Sulfide‐Based Solid‐State Batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries

Challenges and opportunities of practical sulfide-based all-solid-state batteries

Designing High-Performance Sulfide-Based All-Solid-State Lithium Batteries: from Laboratory to Practical Application

Challenges and optimization strategies at the interface between sulfide solid electrolyte and lithium anode

Challenges and opportunities towards silicon-based all-solid-state batteries

Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects

All-Solid-State Lithium Batteries Enabled By Sulfide Electrolytes: From Fundamental Research To Practical Engineering Design

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Building better solid‐state batteries with silicon‐based anodes

Development of Si-Based Anodes for All-Solid-State Li-Ion Batteries

Recent Advances in Cathodes for All-Solid-state Lithium-Sulfur Batteries

Sulfide Electrolytes for All-Solid-state Sodium Batteries: Fundamentals and Modification Strategies

Challenges, interface engineering, and processing strategies toward practical sulfide-based all-solid-state lithium batteries

A Review on the Features and Progress of Silicon Anodes‐Based Solid‐State Batteries

Insight into All‐Solid‐State Li–S Batteries: Challenges, Advances, and Engineering Design

Research progress of all-solid-state lithium-sulfur batteries with sulfide solid electrolytes: materials, interfaces, challenges, and prospects

Progress and Prospects of Inorganic Solid‐State Electrolyte‐Based All‐Solid‐State Li–S Batteries

Interface issues between cathode and electrolyte in sulfide-based all-solid-state lithium batteries and improvement strategies of interface performance through cathode modification