Abstract:Objectives . There is considerable economic demand for products obtained by processing phosphogypsum. In particular, calcium sulfide-based materials having luminescent properties are the object of intensive study due to the wide range of possibilities for their use. The alloying of the structure of calcium sulfide with cations of rare earth elements leads to the appearance of a glow having various colors. However, the high cost of such phosphorescent materials is due to the high chemical purity of the reagents required for their synthesis. The development of efficient methods for obtaining calcium sulfide-based luminescent materials from phosphogypsum is part of an integrated approach to solving the problem of synthesizing economically demanded materials from production waste. Methods . The synthesized materials were studied using X-ray phase analysis and scanning electron microscopy. Photos of the samples were taken under illumination with an incandescent lamp or a fluorescent ultraviolet lamp. Results . According to X-ray phase analysis, phosphogypsum is mainly comprised of calcium sulfate dihydrate and calcium sulfate hemihydrate. Heat treatment of a phosphogypsum sample at a temperature of 1073 K is accompanied by the formation of anhydrous calcium sulfate. In the presence of a reducing agent, a composite material is formed containing a phase of anhydrous calcium sulfate and calcium sulfide. Due to the calcium sulfide content, phosphogypsum has luminescent properties when heat-treated in the presence of various reducing agents, including activated carbon, wood charcoal, vegetable oil, citric acid, starch, and sucrose. Conclusions . Optimal technological conditions for obtaining a composite material exhibiting luminescent properties are revealed. The successful synthesis of phosphor from without nonpretreated phosphogypsum is demonstrated. Optimal technological conditions for obtaining a composite material exhibiting luminescent properties are as follows: heat treatment temperature is 1073–1173 K; isothermal holding time is 60 min; reducing agent quantity is 37–50% (mol). The study results are widely applicable to processing wastes obtained from large-scale chemical production involving the production of a highly demanded inorganic product.

Acid treatment as a beneficiation method for phosphorite waste of Kyzylkum phosphorite plant

Theoretical and Practical Foundations of the Selective Separation of Phosphate Ions from Phosphate Ores with a High Content of Iron Impurities with the Recirculation Method

Enrichment of low-grade phosphorites by the selective leaching method

Treatment of Phosphorus-Containing Raw Materials with Alkaline Solutions

OBTAINING POTASSIUM-CONTAINING FERTILIZERS FROM WASTES OF THE PHOSPHORUS INDUSTRY

JOINT RECYCLING MSW SLAG AND DRILL CUTTINGS INTO MINERAL FERTILIZERS WITH LEAN-GRADE PHOSPHORITE

Treatment and Purification of Phosphogypsum

Alkali treatment-acid leaching of rare earth elements from phosphogypsum fertilizer: insight for additional resource of valuable components

Acid treatment enhances phosphorus release and recovery from waste activated sludge: Performances and related mechanisms

Crystalline phase analysis and phosphorus availability after thermochemical treatment of sewage sludge ash with sodium and potassium sulfates for fertilizer production

Methods for Obtaining Phosphorus-Containing Fertilizers Based on Industrial Waste

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Acidification and alkali precipitation for phosphorus recovery from municipal digested sludge

Research on the technology and mechanism of direct acidification of phosphogypsum and deeply solidify impurities with lime

Optimization of struvite from sewage sludge ash as phosphorus source

On the issue of complex processing of phosphorous iron ores

Processing of Phosphoric Solid Waste by Humic Acid Leaching Method

RESEARCH OF THE PROCESS OF SYNTHESIS OF DIAMMONIUM PHOSPHATE FROM EXTRACTIVE PHOSPHORIC ACID FROM BALANCED PHOSPHATESILICON SHAPES OF THE KARATAU BASIN

Sewage sludge as a fuel and raw material for phosphorus recovery: Combined process of gasification and P extraction

The problem of dephosphorization using waste recycling

Technology for processing phosphogypsum into a fluorescent dye based on calcium sulfide